Siapa penyanyi dan title lagu ini "lom pan long lai"?
Moderator: Moderators
28 posts
• Page 1 of 2 • 1, 2
Siapa penyanyi dan title lagu ini "lom pan long lai"?
Lagu Cina.
"Lom pan, long lai": itu saja saya ingat dia punya lirik (dinyanyikan pada verse pertama).
Ini lagu lama, tapi sampai sekarang saya tidak tau dia punya title atau penyanyi asal.
Kalau ada sesiapa yg tahu, mohon dikongsikan maklumat.
Terima kasih...
"Lom pan, long lai": itu saja saya ingat dia punya lirik (dinyanyikan pada verse pertama).
Ini lagu lama, tapi sampai sekarang saya tidak tau dia punya title atau penyanyi asal.
Kalau ada sesiapa yg tahu, mohon dikongsikan maklumat.
Terima kasih...
Listen to Papier Mache, a music group from Tamparuli: http://papiermache.info
Unconventional World Records: http://worldrec.info
A tribute to Classic rock: http://classicradiorock.com
Unconventional World Records: http://worldrec.info
A tribute to Classic rock: http://classicradiorock.com
 pinolobu
 Moderator
 Posts: 642
 Joined: Mon Dec 12, 2005 12:35 pm
 Credit in hand: 1.06
 Location: Sabah
Advertisement
Re: Siapa penyanyi dan title lagu ini "lom pan long lai"?
pinolobu wrote:Lagu Cina.
"Lom pan, long lai": itu saja saya ingat dia punya lirik (dinyanyikan pada verse pertama).
Ini lagu lama, tapi sampai sekarang saya tidak tau dia punya title atau penyanyi asal.
Kalau ada sesiapa yg tahu, mohon dikongsikan maklumat.
Terima kasih...
bukan si lou man kiong ka?
Dog Barks At Nothing...
Keep Telling Yourself That
Keep Telling Yourself That

payau  Veteran SF
 Posts: 8874
 Joined: Fri Nov 14, 2008 8:14 am
 Credit in hand: Locked
 Bank: Locked
 Location: land of kenyalang
Re: Siapa penyanyi dan title lagu ini "lom pan long lai"?
Kalau tak silap penyanyi asal lagu itu ialah "Francis Yip" yg berasal dari Hongkong
Lagu ini theme song dari TVB series 1980 "Shanghai Bund"
Lagu ini theme song dari TVB series 1980 "Shanghai Bund"
"The good life is one inspired by love and guided by knowledge"

Faith  Global Mod
 Posts: 2522
 Joined: Tue Aug 17, 2004 5:41 pm
 Credit in hand: 13.84
 Bank: 0.00
 Location: KL
Re: Siapa penyanyi dan title lagu ini "lom pan long lai"?
Faith wrote:Kalau tak silap penyanyi asal lagu itu ialah "Francis Yip" yg berasal dari Hongkong
Lagu ini theme song dari TVB series 1980 "Shanghai Bund"
yes..ni lagu tema utk drama series The Bund yg begitu popular pada tahun 1980 yang d bintangi oleh Chow Yun Fatt as Hui Man Keung..
drama ni best...rindu pula mau tengok balik drama ni.. d bawah ni sya sertakan youtube lagu tu la tapi sorry la kualiti audio n visual tidak seberapa memuaskan la...harap maaf...
Green all the Day

bilis  Teman Setia SF
 Posts: 3210
 Joined: Tue Mar 24, 2009 2:15 pm
 Credit in hand: 42.64
 Location: Narita
Re: Siapa penyanyi dan title lagu ini "lom pan long lai"?
Huh...mendengar lagu ni teringat pula aku di kampung..hihihi, ya tuan bilis harap2 RTM akan menayangkan semula drama ini. memang siuk habis pilem ni.
 korud
 Peminat SF
 Posts: 463
 Joined: Fri Jun 27, 2008 1:29 am
 Credit in hand: 17.97
Re: Siapa penyanyi dan title lagu ini "lom pan long lai"?
Wow, thanks everybody!!!
Selepas hampir 30 tahun, akhirnya sekarang saya sudah tau detail lagu ini:
Title lagu: Shanghai Beach (上海灘)
Bahasa: Kantonis
Pencipta melodi dan susunan muzik: Joseph Koo KaFai (b. 1933)
Pencipta lirik: James "Uncle Jim" Wong Jim (1940 – 2004)
Penyanyi asal: Frances Yip [actually saya tahun 1970an lagi sudah dengar lagu dia ini, dia pernah nyanyi lagu "Rasa Sayang"!)
Lirik dan terjemahannya: http://www.templeofchow.com/tvb/lyr_bund.html
Merupakan lagu tema period drama TV klasik dari Hong Kong berjodol The Bund, diterbitkan kali pertama pada 1980 dan original run ada 25 episod.
Pada tahun 1996 dalam filem Shanghai Grand, lagu ini dinyanyikan semula oleh Andy Lau.
Pada awal tahun 1980an saya selalu mendengar lagu ini dinyanyikan di majlismajlis keramaian...
Studio version oleh Frances Yip
Versi Andy Lau
Selepas hampir 30 tahun, akhirnya sekarang saya sudah tau detail lagu ini:
Title lagu: Shanghai Beach (上海灘)
Bahasa: Kantonis
Pencipta melodi dan susunan muzik: Joseph Koo KaFai (b. 1933)
Pencipta lirik: James "Uncle Jim" Wong Jim (1940 – 2004)
Penyanyi asal: Frances Yip [actually saya tahun 1970an lagi sudah dengar lagu dia ini, dia pernah nyanyi lagu "Rasa Sayang"!)
Lirik dan terjemahannya: http://www.templeofchow.com/tvb/lyr_bund.html
Merupakan lagu tema period drama TV klasik dari Hong Kong berjodol The Bund, diterbitkan kali pertama pada 1980 dan original run ada 25 episod.
Pada tahun 1996 dalam filem Shanghai Grand, lagu ini dinyanyikan semula oleh Andy Lau.
Pada awal tahun 1980an saya selalu mendengar lagu ini dinyanyikan di majlismajlis keramaian...
Studio version oleh Frances Yip
Versi Andy Lau
Listen to Papier Mache, a music group from Tamparuli: http://papiermache.info
Unconventional World Records: http://worldrec.info
A tribute to Classic rock: http://classicradiorock.com
Unconventional World Records: http://worldrec.info
A tribute to Classic rock: http://classicradiorock.com
 pinolobu
 Moderator
 Posts: 642
 Joined: Mon Dec 12, 2005 12:35 pm
 Credit in hand: 1.06
 Location: Sabah
Re: Siapa penyanyi dan title lagu ini "lom pan long lai"?
time budak² pernah tinguk skijap ni tu crita oo.. tapi ingat² lupa ni. tpi yg pasti chow yun fatt.
Try.. n Try again...untill i got it...

domba  Orang Baru
 Posts: 153
 Joined: Tue Nov 25, 2008 9:20 am
 Credit in hand: 5.10
Re: Siapa penyanyi dan title lagu ini "lom pan long lai"?
domba wrote:time budak² pernah tinguk skijap ni tu crita oo.. tapi ingat² lupa ni. tpi yg pasti chow yun fatt.
best bah drama ni....
Green all the Day

bilis  Teman Setia SF
 Posts: 3210
 Joined: Tue Mar 24, 2009 2:15 pm
 Credit in hand: 42.64
 Location: Narita
Re: Siapa penyanyi dan title lagu ini "lom pan long lai"?
sa tia suka...tapi sia biasa dingar la...
sia suka ni lagu sina dulu dulu....bnyk juga but...oleh kerana perbezaan bahasa...sa tia ingat tajuk
surry kalau off topic...
sia suka ni lagu sina dulu dulu....bnyk juga but...oleh kerana perbezaan bahasa...sa tia ingat tajuk
surry kalau off topic...
I Walk Alone...No Need To Accompany me

Guest8716  Teman Setia SF
 Posts: 3228
 Joined: Mon Mar 23, 2009 5:17 pm
 Credit in hand: 0.00
Re: Siapa penyanyi dan title lagu ini "lom pan long lai"?
Bukan Andy Lau kah??
[spoiler]Torque, also called moment or moment of force (see the terminology below), is the tendency of a force to rotate an object about an axis,[1] fulcrum, or pivot. Just as a force is a push or a pull, a torque can be thought of as a twist.
Loosely speaking, torque is a measure of the turning force on an object such as a bolt or a flywheel. For example, pushing or pulling the handle of a wrench connected to a nut or bolt produces a torque (turning force) that loosens or tightens the nut or bolt.
The terminology for this concept is not straightforward: In the US, in physics it is usually called "torque" and in mechanical engineering it is called "moment".[2] However outside the US this varies. In the UK for instance, most physicists will use the term "moment". In mechanical engineering, the term "torque" means something different,[3] described below. In this article the word "torque" is always used to mean the same as "moment".
The symbol for torque is typically τ, the Greek letter tau. When it is called moment, it is commonly denoted M.
The magnitude of torque depends on three quantities: the force applied, the length of the lever arm[4] connecting the axis to the point of force application, and the angle between the force vector and the lever arm. In symbols:
\boldsymbol \tau = \mathbf{r}\times \mathbf{F}\,\!
\tau = rF\sin \theta\,\!
where
τ is the torque vector and τ is the magnitude of the torque,
r is the displacement vector (a vector from the point from which torque is measured to the point where force is applied), and r is the length (or magnitude) of the lever arm vector,
F is the force vector, and F is the magnitude of the force,
× denotes the cross product,
θ is the angle between the force vector and the lever arm vector.
The length of the lever arm is particularly important; choosing this length appropriately lies behind the operation of levers, pulleys, gears, and most other simple machines involving a mechanical advantage.
The SI unit for torque is the newton metre (N·m). For more on the units of torque, see below.
Contents
[hide]
1 Terminology
2 History
3 Definition and relation to angular momentum
3.1 Proof of the equivalence of definitions for a fixed instantaneous centre of rotation
4 Units
5 Special cases and other facts
5.1 Moment arm formula
5.2 Static equilibrium
5.3 Net force versus torque
6 Machine torque
7 Relationship between torque, power and energy
7.1 Conversion to other units
7.2 Derivation
8 Principle of moments
9 Torque multiplier
10 See also
11 References
12 External links
Terminology
See also: Couple (mechanics)
In mechanical engineering (unlike physics), the terms "torque" and "moment" are not interchangeable. "Moment" is the general term for the tendency of one or more applied forces to rotate an object about an axis (the concept which in physics is called torque).[3] "Torque" is a special case of this: If the applied force vectors add to zero (i.e., their "resultant" is zero), then the forces are called a "couple" and their moment is called a "torque".[3]
For example, a rotational force down a shaft, such as a turning screwdriver, forms a couple, so the resulting moment is called a "torque". By contrast, a lateral force on a beam produces a moment (called a bending moment), but since the net force is nonzero, this bending moment is not called a "torque".
This article follows physics terminology by calling all moments by the term "torque", whether or not they are associated with a couple.
History
The concept of torque, also called moment or couple, originated with the studies of Archimedes on levers. The rotational analogues of force, mass, and acceleration are torque, moment of inertia, and angular acceleration, respectively.
Definition and relation to angular momentum
A particle is located at position r relative to its axis of rotation. When a force F is applied to the particle, only the perpendicular component F⊥ produces a torque. This torque τ = r × F has magnitude τ = r F⊥ = r F sinθ and is directed outward from the page.
Torque is defined about a point not specifically about axis as mentioned in several books.
A force applied at a right angle to a lever multiplied by its distance from the lever's fulcrum (the length of the lever arm) is its torque. A force of three newtons applied two metres from the fulcrum, for example, exerts the same torque as a force of one newton applied six metres from the fulcrum. The direction of the torque can be determined by using the right hand grip rule: if the fingers of the right hand curl in the direction of rotation and the thumb points along the axis of rotation, then the thumb also points in the direction of the torque.[5]
More generally, the torque on a particle (which has the position r in some reference frame) can be defined as the cross product:
\boldsymbol{\tau} = \mathbf{r} \times \mathbf{F},
where r is the particle's position vector relative to the fulcrum, and F is the force acting on the particle. The magnitude τ of the torque is given by
\tau = rF\sin\theta,\!
where r is the distance from the axis of rotation to the particle, F is the magnitude of the force applied, and θ is the angle between the position and force vectors. Alternatively,
\tau = rF_{\perp},
where F⊥ is the amount of force directed perpendicularly to the position of the particle. Any force directed parallel to the particle's position vector does not produce a torque.[6]
It follows from the properties of the cross product that the torque vector is perpendicular to both the position and force vectors. It points along the axis of rotation, and its direction is determined by the righthand rule.[6]
The unbalanced torque on a body along axis of rotation determines the rate of change of the body's angular momentum,
\boldsymbol{\tau} = \frac{\mathrm{d}\mathbf{L}}{\mathrm{d}t}
where L is the angular momentum vector and t is time. If multiple torques are acting on the body, it is instead the net torque which determines the rate of change of the angular momentum:
\boldsymbol{\tau}_1 + \cdots + \boldsymbol{\tau}_n = \boldsymbol{\tau}_{\mathrm{net}} = \frac{\mathrm{d}\mathbf{L}}{\mathrm{d}t}.
For rotation about a fixed axis,
\mathbf{L} = I\boldsymbol{\omega},
where I is the moment of inertia and ω is the angular velocity. It follows that
\boldsymbol{\tau}_{\mathrm{net}} = \frac{\mathrm{d}\mathbf{L}}{\mathrm{d}t} = \frac{\mathrm{d}(I\boldsymbol{\omega})}{\mathrm{d}t} = I\frac{\mathrm{d}\boldsymbol{\omega}}{\mathrm{d}t} = I\boldsymbol{\alpha},
where α is the angular acceleration of the body, measured in rad·s−2.This equation has limitation that torque equation is to be only written about instantaneous axis of rotation or center of mass for any type of motioneither motion is pure translation,pure rotation or mixed motion.I=Moment of inertia about point about which torque is written(either about instantaneous axis of rotation or center of mass only). If body is in translatory equilibrium then torque equation is same about all points in plane of motion.
Proof of the equivalence of definitions for a fixed instantaneous centre of rotation
The definition of angular momentum for a single particle is:
\mathbf{L} = \mathbf{r} \times \mathbf{p}
where "×" indicates the vector cross product and p is the particle's linear momentum. The timederivative of this is:
\frac{d\mathbf{L}}{dt} = \mathbf{r} \times \frac{d\mathbf{p}}{dt} + \frac{d\mathbf{r}}{dt} \times \mathbf{p}.
This result can easily be proven by splitting the vectors into components and applying the product rule. Now using the definitions of velocity v = dr/dt, acceleration a = dv/dt and linear momentum p = mv (if mass is constant),
\frac{d\mathbf{L}}{dt} = \mathbf{r} \times m \frac{d\mathbf{v}}{dt} + \mathbf{v} \times m\mathbf{v}.
The cross product of any vector with itself is zero, so the second term vanishes. Hence with the definition of force F = ma (Newton's 2nd law),
\frac{d\mathbf{L}}{dt} = \mathbf{r} \times \mathbf{F}.
Then by definition, torque τ = r × F.
If multiple forces are applied, Newton's second law instead reads Fnet = ma, and it follows that
\frac{d\mathbf{L}}{dt} = \mathbf{r} \times \mathbf{F}_{\mathrm{net}} = \boldsymbol{\tau}_{\mathrm{net}}.
The proof relies on the assumption that mass is constant; this is valid only in nonrelativistic systems in which no mass is being ejected.
Units
Torque has dimensions of force times distance. Official SI literature suggests using the unit newton metre (N·m) or the unit joule per radian.[7] The unit newton metre is properly denoted N·m or N m.[8] This avoids ambiguity with mN, millinewtons.
The joule, which is the SI unit for energy or work, is dimensionally equivalent to a newton metre, but it is not used for torque. Energy and torque are entirely different concepts, so the practice of using different unit names for them helps avoid mistakes and misunderstandings.[7] The dimensional equivalence of these units, of course, is not simply a coincidence: A torque of 1 N·m applied through a full revolution will require an energy of exactly 2π joules. Mathematically,
E= \tau \theta\
where E is the energy, τ is magnitude of the torque, and θ is the angle moved (in radians). This equation motivates the alternate unit name joules per radian.[7]
In British unit, "poundforcefeet" (lbf x ft), "footpoundsforce", "inchpoundsforce", "ounceforceinches" (oz x in) are used, and other nonSI units of torque includes "metrekilogramsforce". For all these units, the word "force" is often left out,[9] for example abbreviating "poundforcefoot" to simply "poundfoot" (in this case, it would be implicit that the "pound" is poundforce and not poundmass).
Sometimes one may see torque given units that don't dimensionally make sense. For example: g x cm . In these units, g should be understood as the force given by the weight of 1 gram at the surface of the earth. The surface of the earth is understood to have an average acceleration of gravity (approx. 9.80665 m/sec2).
Special cases and other facts
Moment arm formula
Moment arm diagram
A very useful special case, often given as the definition of torque in fields other than physics, is as follows:
\tau = (\textrm{moment\ arm}) (\textrm{force}).
The construction of the "moment arm" is shown in the figure to the right, along with the vectors r and F mentioned above. The problem with this definition is that it does not give the direction of the torque but only the magnitude, and hence it is difficult to use in threedimensional cases. If the force is perpendicular to the displacement vector r, the moment arm will be equal to the distance to the centre, and torque will be a maximum for the given force. The equation for the magnitude of a torque, arising from a perpendicular force:
\tau = (\textrm{distance\ to\ centre}) (\textrm{force}).
For example, if a person places a force of 10 N on a spanner (wrench) which is 0.5 m long, the torque will be 5 N m, assuming that the person pulls the spanner by applying force perpendicular to the spanner.
The torque caused by the two opposing forces Fg and −Fg causes a change in the angular momentum L in the direction of that torque. This causes the top to precess.
Static equilibrium
For an object to be in static equilibrium, not only must the sum of the forces be zero, but also the sum of the torques (moments) about any point. For a twodimensional situation with horizontal and vertical forces, the sum of the forces requirement is two equations: ΣH = 0 and ΣV = 0, and the torque a third equation: Στ = 0. That is, to solve statically determinate equilibrium problems in twodimensions, we use three equations.
Net force versus torque
When the net force on the system is zero, the torque measured from any point in space is the same. For example, the torque on a currentcarrying loop in a uniform magnetic field is the same regardless of your point of reference. If the net force \mathbf{F} is not zero, and \mathbf{\tau}_1 is the torque measured from \mathbf{r}_1, then the torque measured from \mathbf{r}_2 is \mathbf{\tau}_2 = \mathbf{\tau}_1 + (\mathbf{r}_1  \mathbf{r}_2) \times \mathbf{F}
Machine torque
Torque curve of a motorcycle ("BMW K 1200 R 2005"). The horizontal axis is the speed (in rpm) that the crankshaft is turning, and the vertical axis is the torque (in Newton metres) that the engine is capable of providing at that speed.
Torque is part of the basic specification of an engine: the power output of an engine is expressed as its torque multiplied by its rotational speed of the axis. Internalcombustion engines produce useful torque only over a limited range of rotational speeds (typically from around 1,000–6,000 rpm for a small car). The varying torque output over that range can be measured with a dynamometer, and shown as a torque curve. The peak of that torque curve occurs somewhat below the overall power peak. The torque peak cannot, by definition, appear at higher rpm than the power peak.
Understanding the relationship between torque, power and engine speed is vital in automotive engineering, concerned as it is with transmitting power from the engine through the drive train to the wheels. Power is a function of torque and engine speed. The gearing of the drive train must be chosen appropriately to make the most of the motor's torque characteristics. Power at the drive wheels is equal to engine power less mechanical losses regardless of any gearing between the engine and drive wheels.
Steam engines and electric motors tend to produce maximum torque close to zero rpm, with the torque diminishing as rotational speed rises (due to increasing friction and other constraints). Reciprocating steam engines can start heavy loads from zero RPM without a clutch.
Relationship between torque, power and energy
If a force is allowed to act through a distance, it is doing mechanical work. Similarly, if torque is allowed to act through a rotational distance, it is doing work. Mathematically, for rotation about a fixed axis through the center of mass,
W = \int_{\theta_1}^{\theta_2} \tau\ \mathrm{d}\theta,
where W is work, τ is torque, and θ1 and θ2 represent (respectively) the initial and final angular positions of the body.[10] It follows from the workenergy theorem that W also represents the change in the rotational kinetic energy Krot of the body, given by
K_{\mathrm{rot}} = \tfrac{1}{2}I\omega^2,
where I is the moment of inertia of the body and ω is its angular speed.[10]
Power is the work per unit time, given by
P = \boldsymbol{\tau} \cdot \boldsymbol{\omega},
where P is power, τ is torque, ω is the angular velocity, and · represents the scalar product.
Mathematically, the equation may be rearranged to compute torque for a given power output. Note that the power injected by the torque depends only on the instantaneous angular speed – not on whether the angular speed increases, decreases, or remains constant while the torque is being applied (this is equivalent to the linear case where the power injected by a force depends only on the instantaneous speed – not on the resulting acceleration, if any).
In practice, this relationship can be observed in power stations which are connected to a large electrical power grid. In such an arrangement, the generator's angular speed is fixed by the grid's frequency, and the power output of the plant is determined by the torque applied to the generator's axis of rotation.
Consistent units must be used. For metric SI units power is watts, torque is newton metres and angular speed is radians per second (not rpm and not revolutions per second).
Also, the unit newton metre is dimensionally equivalent to the joule, which is the unit of energy. However, in the case of torque, the unit is assigned to a vector, whereas for energy, it is assigned to a scalar.
Conversion to other units
A conversion factor may be necessary when using different units of power, torque, or angular speed. For example, if rotational speed (revolutions per time) is used in place of angular speed (radians per time), we multiply by a factor of 2π radians per revolution.
\mbox{power} = \mbox{torque} \times 2 \pi \times \mbox{rotational speed}
Adding units:
\mbox{power (W)} = \mbox{torque (N}\cdot\mbox{m)} \times 2 \pi \times \mbox{rotational speed (rps)}
Dividing on the left by 60 seconds per minute and by 1000 watts per kilowatt gives us the following.
\mbox{power (kW)} = \frac{ \mbox{torque (N}\cdot\mbox{m)} \times 2 \pi \times \mbox{rotational speed (rpm)}} {60000}
where rotational speed is in revolutions per minute (rpm).
Some people (e.g. American automotive engineers) use horsepower (imperial mechanical) for power, footpounds (lbf·ft) for torque and rpm for rotational speed. This results in the formula changing to:
\mbox{power (hp)} = \frac{ \mbox{torque(lbf}\cdot\mbox{ft)} \times 2 \pi \times \mbox{rotational speed (rpm)} }{33000}.
The constant below in, ft·lbf/min, changes with the definition of the horsepower; for example, using metric horsepower, it becomes ~32,550.
Use of other units (e.g. BTU/h for power) would require a different custom conversion factor.
Derivation
For a rotating object, the linear distance covered at the circumference in a radian of rotation is the product of the radius with the angular speed. That is: linear speed = radius × angular speed. By definition, linear distance=linear speed × time=radius × angular speed × time.
By the definition of torque: torque=force × radius. We can rearrange this to determine force=torque ÷ radius. These two values can be substituted into the definition of power:
\mbox{power} = \frac{\mbox{force} \times \mbox{linear distance}}{\mbox{time}}=\frac{\left(\frac{\mbox{torque}}{\displaystyle{r}}\right) \times (r \times \mbox{angular speed} \times t)} {t} = \mbox{torque} \times \mbox{angular speed}.
The radius r and time t have dropped out of the equation. However angular speed must be in radians, by the assumed direct relationship between linear speed and angular speed at the beginning of the derivation. If the rotational speed is measured in revolutions per unit of time, the linear speed and distance are increased proportionately by 2π in the above derivation to give:
\mbox{power}=\mbox{torque} \times 2 \pi \times \mbox{rotational speed}. \,
If torque is in lbf·ft and rotational speed in revolutions per minute, the above equation gives power in ft·lbf/min. The horsepower form of the equation is then derived by applying the conversion factor 33000 ft·lbf/min per horsepower:
\mbox{power} = \mbox{torque } \times\ 2 \pi\ \times \mbox{ rotational speed} \cdot \frac{\mbox{ft}\cdot\mbox{lbf}}{\mbox{min}} \times \frac{\mbox{horsepower}}{33000 \cdot \frac{\mbox{ft }\cdot\mbox{ lbf}}{\mbox{min}} } \approx \frac {\mbox{torque} \times \mbox{RPM}}{5252}
because 5252.113122... = \frac {33000} {2 \pi}. \,
Principle of moments
The Principle of Moments, also known as Varignon's theorem (not to be confused with the geometrical theorem of the same name) states that the sum of torques due to several forces applied to a single point is equal to the torque due to the sum (resultant) of the forces. Mathematically, this follows from:
(\mathbf{r}\times\mathbf{F}_1) + (\mathbf{r}\times\mathbf{F}_2) + \cdots = \mathbf{r}\times(\mathbf{F}_1+\mathbf{F}_2 + \cdots).
Torque multiplier
A torque multiplier is a gear box, which works on the principle of epicyclic gearing. The given load at the input gets multiplied as per the multiplication factor and transmitted to the output, thereby achieving greater load with minimal effort.
sumber wikipediaGuntap...
kalau ikut ni penerangan pening jg tu kepala mo pikir...sinang cerita torque kekuatan tu injin tarik tu badan kereta
Torque, also called moment or moment of force (see the terminology below), is the tendency of a force to rotate an object about an axis,[1] fulcrum, or pivot. Just as a force is a push or a pull, a torque can be thought of as a twist.
Loosely speaking, torque is a measure of the turning force on an object such as a bolt or a flywheel. For example, pushing or pulling the handle of a wrench connected to a nut or bolt produces a torque (turning force) that loosens or tightens the nut or bolt.
The terminology for this concept is not straightforward: In the US, in physics it is usually called "torque" and in mechanical engineering it is called "moment".[2] However outside the US this varies. In the UK for instance, most physicists will use the term "moment". In mechanical engineering, the term "torque" means something different,[3] described below. In this article the word "torque" is always used to mean the same as "moment".
The symbol for torque is typically τ, the Greek letter tau. When it is called moment, it is commonly denoted M.
The magnitude of torque depends on three quantities: the force applied, the length of the lever arm[4] connecting the axis to the point of force application, and the angle between the force vector and the lever arm. In symbols:
\boldsymbol \tau = \mathbf{r}\times \mathbf{F}\,\!
\tau = rF\sin \theta\,\!
where
τ is the torque vector and τ is the magnitude of the torque,
r is the displacement vector (a vector from the point from which torque is measured to the point where force is applied), and r is the length (or magnitude) of the lever arm vector,
F is the force vector, and F is the magnitude of the force,
× denotes the cross product,
θ is the angle between the force vector and the lever arm vector.
The length of the lever arm is particularly important; choosing this length appropriately lies behind the operation of levers, pulleys, gears, and most other simple machines involving a mechanical advantage.
The SI unit for torque is the newton metre (N·m). For more on the units of torque, see below.
Contents
[hide]
1 Terminology
2 History
3 Definition and relation to angular momentum
3.1 Proof of the equivalence of definitions for a fixed instantaneous centre of rotation
4 Units
5 Special cases and other facts
5.1 Moment arm formula
5.2 Static equilibrium
5.3 Net force versus torque
6 Machine torque
7 Relationship between torque, power and energy
7.1 Conversion to other units
7.2 Derivation
8 Principle of moments
9 Torque multiplier
10 See also
11 References
12 External links
Terminology
See also: Couple (mechanics)
In mechanical engineering (unlike physics), the terms "torque" and "moment" are not interchangeable. "Moment" is the general term for the tendency of one or more applied forces to rotate an object about an axis (the concept which in physics is called torque).[3] "Torque" is a special case of this: If the applied force vectors add to zero (i.e., their "resultant" is zero), then the forces are called a "couple" and their moment is called a "torque".[3]
For example, a rotational force down a shaft, such as a turning screwdriver, forms a couple, so the resulting moment is called a "torque". By contrast, a lateral force on a beam produces a moment (called a bending moment), but since the net force is nonzero, this bending moment is not called a "torque".
This article follows physics terminology by calling all moments by the term "torque", whether or not they are associated with a couple.
History
The concept of torque, also called moment or couple, originated with the studies of Archimedes on levers. The rotational analogues of force, mass, and acceleration are torque, moment of inertia, and angular acceleration, respectively.
Definition and relation to angular momentum
A particle is located at position r relative to its axis of rotation. When a force F is applied to the particle, only the perpendicular component F⊥ produces a torque. This torque τ = r × F has magnitude τ = r F⊥ = r F sinθ and is directed outward from the page.
Torque is defined about a point not specifically about axis as mentioned in several books.
A force applied at a right angle to a lever multiplied by its distance from the lever's fulcrum (the length of the lever arm) is its torque. A force of three newtons applied two metres from the fulcrum, for example, exerts the same torque as a force of one newton applied six metres from the fulcrum. The direction of the torque can be determined by using the right hand grip rule: if the fingers of the right hand curl in the direction of rotation and the thumb points along the axis of rotation, then the thumb also points in the direction of the torque.[5]
More generally, the torque on a particle (which has the position r in some reference frame) can be defined as the cross product:
\boldsymbol{\tau} = \mathbf{r} \times \mathbf{F},
where r is the particle's position vector relative to the fulcrum, and F is the force acting on the particle. The magnitude τ of the torque is given by
\tau = rF\sin\theta,\!
where r is the distance from the axis of rotation to the particle, F is the magnitude of the force applied, and θ is the angle between the position and force vectors. Alternatively,
\tau = rF_{\perp},
where F⊥ is the amount of force directed perpendicularly to the position of the particle. Any force directed parallel to the particle's position vector does not produce a torque.[6]
It follows from the properties of the cross product that the torque vector is perpendicular to both the position and force vectors. It points along the axis of rotation, and its direction is determined by the righthand rule.[6]
The unbalanced torque on a body along axis of rotation determines the rate of change of the body's angular momentum,
\boldsymbol{\tau} = \frac{\mathrm{d}\mathbf{L}}{\mathrm{d}t}
where L is the angular momentum vector and t is time. If multiple torques are acting on the body, it is instead the net torque which determines the rate of change of the angular momentum:
\boldsymbol{\tau}_1 + \cdots + \boldsymbol{\tau}_n = \boldsymbol{\tau}_{\mathrm{net}} = \frac{\mathrm{d}\mathbf{L}}{\mathrm{d}t}.
For rotation about a fixed axis,
\mathbf{L} = I\boldsymbol{\omega},
where I is the moment of inertia and ω is the angular velocity. It follows that
\boldsymbol{\tau}_{\mathrm{net}} = \frac{\mathrm{d}\mathbf{L}}{\mathrm{d}t} = \frac{\mathrm{d}(I\boldsymbol{\omega})}{\mathrm{d}t} = I\frac{\mathrm{d}\boldsymbol{\omega}}{\mathrm{d}t} = I\boldsymbol{\alpha},
where α is the angular acceleration of the body, measured in rad·s−2.This equation has limitation that torque equation is to be only written about instantaneous axis of rotation or center of mass for any type of motioneither motion is pure translation,pure rotation or mixed motion.I=Moment of inertia about point about which torque is written(either about instantaneous axis of rotation or center of mass only). If body is in translatory equilibrium then torque equation is same about all points in plane of motion.
Proof of the equivalence of definitions for a fixed instantaneous centre of rotation
The definition of angular momentum for a single particle is:
\mathbf{L} = \mathbf{r} \times \mathbf{p}
where "×" indicates the vector cross product and p is the particle's linear momentum. The timederivative of this is:
\frac{d\mathbf{L}}{dt} = \mathbf{r} \times \frac{d\mathbf{p}}{dt} + \frac{d\mathbf{r}}{dt} \times \mathbf{p}.
This result can easily be proven by splitting the vectors into components and applying the product rule. Now using the definitions of velocity v = dr/dt, acceleration a = dv/dt and linear momentum p = mv (if mass is constant),
\frac{d\mathbf{L}}{dt} = \mathbf{r} \times m \frac{d\mathbf{v}}{dt} + \mathbf{v} \times m\mathbf{v}.
The cross product of any vector with itself is zero, so the second term vanishes. Hence with the definition of force F = ma (Newton's 2nd law),
\frac{d\mathbf{L}}{dt} = \mathbf{r} \times \mathbf{F}.
Then by definition, torque τ = r × F.
If multiple forces are applied, Newton's second law instead reads Fnet = ma, and it follows that
\frac{d\mathbf{L}}{dt} = \mathbf{r} \times \mathbf{F}_{\mathrm{net}} = \boldsymbol{\tau}_{\mathrm{net}}.
The proof relies on the assumption that mass is constant; this is valid only in nonrelativistic systems in which no mass is being ejected.
Units
Torque has dimensions of force times distance. Official SI literature suggests using the unit newton metre (N·m) or the unit joule per radian.[7] The unit newton metre is properly denoted N·m or N m.[8] This avoids ambiguity with mN, millinewtons.
The joule, which is the SI unit for energy or work, is dimensionally equivalent to a newton metre, but it is not used for torque. Energy and torque are entirely different concepts, so the practice of using different unit names for them helps avoid mistakes and misunderstandings.[7] The dimensional equivalence of these units, of course, is not simply a coincidence: A torque of 1 N·m applied through a full revolution will require an energy of exactly 2π joules. Mathematically,
E= \tau \theta\
where E is the energy, τ is magnitude of the torque, and θ is the angle moved (in radians). This equation motivates the alternate unit name joules per radian.[7]
In British unit, "poundforcefeet" (lbf x ft), "footpoundsforce", "inchpoundsforce", "ounceforceinches" (oz x in) are used, and other nonSI units of torque includes "metrekilogramsforce". For all these units, the word "force" is often left out,[9] for example abbreviating "poundforcefoot" to simply "poundfoot" (in this case, it would be implicit that the "pound" is poundforce and not poundmass).
Sometimes one may see torque given units that don't dimensionally make sense. For example: g x cm . In these units, g should be understood as the force given by the weight of 1 gram at the surface of the earth. The surface of the earth is understood to have an average acceleration of gravity (approx. 9.80665 m/sec2).
Special cases and other facts
Moment arm formula
Moment arm diagram
A very useful special case, often given as the definition of torque in fields other than physics, is as follows:
\tau = (\textrm{moment\ arm}) (\textrm{force}).
The construction of the "moment arm" is shown in the figure to the right, along with the vectors r and F mentioned above. The problem with this definition is that it does not give the direction of the torque but only the magnitude, and hence it is difficult to use in threedimensional cases. If the force is perpendicular to the displacement vector r, the moment arm will be equal to the distance to the centre, and torque will be a maximum for the given force. The equation for the magnitude of a torque, arising from a perpendicular force:
\tau = (\textrm{distance\ to\ centre}) (\textrm{force}).
For example, if a person places a force of 10 N on a spanner (wrench) which is 0.5 m long, the torque will be 5 N m, assuming that the person pulls the spanner by applying force perpendicular to the spanner.
The torque caused by the two opposing forces Fg and −Fg causes a change in the angular momentum L in the direction of that torque. This causes the top to precess.
Static equilibrium
For an object to be in static equilibrium, not only must the sum of the forces be zero, but also the sum of the torques (moments) about any point. For a twodimensional situation with horizontal and vertical forces, the sum of the forces requirement is two equations: ΣH = 0 and ΣV = 0, and the torque a third equation: Στ = 0. That is, to solve statically determinate equilibrium problems in twodimensions, we use three equations.
Net force versus torque
When the net force on the system is zero, the torque measured from any point in space is the same. For example, the torque on a currentcarrying loop in a uniform magnetic field is the same regardless of your point of reference. If the net force \mathbf{F} is not zero, and \mathbf{\tau}_1 is the torque measured from \mathbf{r}_1, then the torque measured from \mathbf{r}_2 is \mathbf{\tau}_2 = \mathbf{\tau}_1 + (\mathbf{r}_1  \mathbf{r}_2) \times \mathbf{F}
Machine torque
Torque curve of a motorcycle ("BMW K 1200 R 2005"). The horizontal axis is the speed (in rpm) that the crankshaft is turning, and the vertical axis is the torque (in Newton metres) that the engine is capable of providing at that speed.
Torque is part of the basic specification of an engine: the power output of an engine is expressed as its torque multiplied by its rotational speed of the axis. Internalcombustion engines produce useful torque only over a limited range of rotational speeds (typically from around 1,000–6,000 rpm for a small car). The varying torque output over that range can be measured with a dynamometer, and shown as a torque curve. The peak of that torque curve occurs somewhat below the overall power peak. The torque peak cannot, by definition, appear at higher rpm than the power peak.
Understanding the relationship between torque, power and engine speed is vital in automotive engineering, concerned as it is with transmitting power from the engine through the drive train to the wheels. Power is a function of torque and engine speed. The gearing of the drive train must be chosen appropriately to make the most of the motor's torque characteristics. Power at the drive wheels is equal to engine power less mechanical losses regardless of any gearing between the engine and drive wheels.
Steam engines and electric motors tend to produce maximum torque close to zero rpm, with the torque diminishing as rotational speed rises (due to increasing friction and other constraints). Reciprocating steam engines can start heavy loads from zero RPM without a clutch.
Relationship between torque, power and energy
If a force is allowed to act through a distance, it is doing mechanical work. Similarly, if torque is allowed to act through a rotational distance, it is doing work. Mathematically, for rotation about a fixed axis through the center of mass,
W = \int_{\theta_1}^{\theta_2} \tau\ \mathrm{d}\theta,
where W is work, τ is torque, and θ1 and θ2 represent (respectively) the initial and final angular positions of the body.[10] It follows from the workenergy theorem that W also represents the change in the rotational kinetic energy Krot of the body, given by
K_{\mathrm{rot}} = \tfrac{1}{2}I\omega^2,
where I is the moment of inertia of the body and ω is its angular speed.[10]
Power is the work per unit time, given by
P = \boldsymbol{\tau} \cdot \boldsymbol{\omega},
where P is power, τ is torque, ω is the angular velocity, and · represents the scalar product.
Mathematically, the equation may be rearranged to compute torque for a given power output. Note that the power injected by the torque depends only on the instantaneous angular speed – not on whether the angular speed increases, decreases, or remains constant while the torque is being applied (this is equivalent to the linear case where the power injected by a force depends only on the instantaneous speed – not on the resulting acceleration, if any).
In practice, this relationship can be observed in power stations which are connected to a large electrical power grid. In such an arrangement, the generator's angular speed is fixed by the grid's frequency, and the power output of the plant is determined by the torque applied to the generator's axis of rotation.
Consistent units must be used. For metric SI units power is watts, torque is newton metres and angular speed is radians per second (not rpm and not revolutions per second).
Also, the unit newton metre is dimensionally equivalent to the joule, which is the unit of energy. However, in the case of torque, the unit is assigned to a vector, whereas for energy, it is assigned to a scalar.
Conversion to other units
A conversion factor may be necessary when using different units of power, torque, or angular speed. For example, if rotational speed (revolutions per time) is used in place of angular speed (radians per time), we multiply by a factor of 2π radians per revolution.
\mbox{power} = \mbox{torque} \times 2 \pi \times \mbox{rotational speed}
Adding units:
\mbox{power (W)} = \mbox{torque (N}\cdot\mbox{m)} \times 2 \pi \times \mbox{rotational speed (rps)}
Dividing on the left by 60 seconds per minute and by 1000 watts per kilowatt gives us the following.
\mbox{power (kW)} = \frac{ \mbox{torque (N}\cdot\mbox{m)} \times 2 \pi \times \mbox{rotational speed (rpm)}} {60000}
where rotational speed is in revolutions per minute (rpm).
Some people (e.g. American automotive engineers) use horsepower (imperial mechanical) for power, footpounds (lbf·ft) for torque and rpm for rotational speed. This results in the formula changing to:
\mbox{power (hp)} = \frac{ \mbox{torque(lbf}\cdot\mbox{ft)} \times 2 \pi \times \mbox{rotational speed (rpm)} }{33000}.
The constant below in, ft·lbf/min, changes with the definition of the horsepower; for example, using metric horsepower, it becomes ~32,550.
Use of other units (e.g. BTU/h for power) would require a different custom conversion factor.
Derivation
For a rotating object, the linear distance covered at the circumference in a radian of rotation is the product of the radius with the angular speed. That is: linear speed = radius × angular speed. By definition, linear distance=linear speed × time=radius × angular speed × time.
By the definition of torque: torque=force × radius. We can rearrange this to determine force=torque ÷ radius. These two values can be substituted into the definition of power:
\mbox{power} = \frac{\mbox{force} \times \mbox{linear distance}}{\mbox{time}}=\frac{\left(\frac{\mbox{torque}}{\displaystyle{r}}\right) \times (r \times \mbox{angular speed} \times t)} {t} = \mbox{torque} \times \mbox{angular speed}.
The radius r and time t have dropped out of the equation. However angular speed must be in radians, by the assumed direct relationship between linear speed and angular speed at the beginning of the derivation. If the rotational speed is measured in revolutions per unit of time, the linear speed and distance are increased proportionately by 2π in the above derivation to give:
\mbox{power}=\mbox{torque} \times 2 \pi \times \mbox{rotational speed}. \,
If torque is in lbf·ft and rotational speed in revolutions per minute, the above equation gives power in ft·lbf/min. The horsepower form of the equation is then derived by applying the conversion factor 33000 ft·lbf/min per horsepower:
\mbox{power} = \mbox{torque } \times\ 2 \pi\ \times \mbox{ rotational speed} \cdot \frac{\mbox{ft}\cdot\mbox{lbf}}{\mbox{min}} \times \frac{\mbox{horsepower}}{33000 \cdot \frac{\mbox{ft }\cdot\mbox{ lbf}}{\mbox{min}} } \approx \frac {\mbox{torque} \times \mbox{RPM}}{5252}
because 5252.113122... = \frac {33000} {2 \pi}. \,
Principle of moments
The Principle of Moments, also known as Varignon's theorem (not to be confused with the geometrical theorem of the same name) states that the sum of torques due to several forces applied to a single point is equal to the torque due to the sum (resultant) of the forces. Mathematically, this follows from:
(\mathbf{r}\times\mathbf{F}_1) + (\mathbf{r}\times\mathbf{F}_2) + \cdots = \mathbf{r}\times(\mathbf{F}_1+\mathbf{F}_2 + \cdots).
Torque multiplier
A torque multiplier is a gear box, which works on the principle of epicyclic gearing. The given load at the input gets multiplied as per the multiplication factor and transmitted to the output, thereby achieving greater load with minimal effort.
sumber wikipediaGuntap...
kalau ikut ni penerangan pening jg tu kepala mo pikir...sinang cerita torque kekuatan tu injin tarik tu badan kereta
Torque, also called moment or moment of force (see the terminology below), is the tendency of a force to rotate an object about an axis,[1] fulcrum, or pivot. Just as a force is a push or a pull, a torque can be thought of as a twist.
Loosely speaking, torque is a measure of the turning force on an object such as a bolt or a flywheel. For example, pushing or pulling the handle of a wrench connected to a nut or bolt produces a torque (turning force) that loosens or tightens the nut or bolt.
The terminology for this concept is not straightforward: In the US, in physics it is usually called "torque" and in mechanical engineering it is called "moment".[2] However outside the US this varies. In the UK for instance, most physicists will use the term "moment". In mechanical engineering, the term "torque" means something different,[3] described below. In this article the word "torque" is always used to mean the same as "moment".
The symbol for torque is typically τ, the Greek letter tau. When it is called moment, it is commonly denoted M.
The magnitude of torque depends on three quantities: the force applied, the length of the lever arm[4] connecting the axis to the point of force application, and the angle between the force vector and the lever arm. In symbols:
\boldsymbol \tau = \mathbf{r}\times \mathbf{F}\,\!
\tau = rF\sin \theta\,\!
where
τ is the torque vector and τ is the magnitude of the torque,
r is the displacement vector (a vector from the point from which torque is measured to the point where force is applied), and r is the length (or magnitude) of the lever arm vector,
F is the force vector, and F is the magnitude of the force,
× denotes the cross product,
θ is the angle between the force vector and the lever arm vector.
The length of the lever arm is particularly important; choosing this length appropriately lies behind the operation of levers, pulleys, gears, and most other simple machines involving a mechanical advantage.
The SI unit for torque is the newton metre (N·m). For more on the units of torque, see below.
Contents
[hide]
1 Terminology
2 History
3 Definition and relation to angular momentum
3.1 Proof of the equivalence of definitions for a fixed instantaneous centre of rotation
4 Units
5 Special cases and other facts
5.1 Moment arm formula
5.2 Static equilibrium
5.3 Net force versus torque
6 Machine torque
7 Relationship between torque, power and energy
7.1 Conversion to other units
7.2 Derivation
8 Principle of moments
9 Torque multiplier
10 See also
11 References
12 External links
Terminology
See also: Couple (mechanics)
In mechanical engineering (unlike physics), the terms "torque" and "moment" are not interchangeable. "Moment" is the general term for the tendency of one or more applied forces to rotate an object about an axis (the concept which in physics is called torque).[3] "Torque" is a special case of this: If the applied force vectors add to zero (i.e., their "resultant" is zero), then the forces are called a "couple" and their moment is called a "torque".[3]
For example, a rotational force down a shaft, such as a turning screwdriver, forms a couple, so the resulting moment is called a "torque". By contrast, a lateral force on a beam produces a moment (called a bending moment), but since the net force is nonzero, this bending moment is not called a "torque".
This article follows physics terminology by calling all moments by the term "torque", whether or not they are associated with a couple.
History
The concept of torque, also called moment or couple, originated with the studies of Archimedes on levers. The rotational analogues of force, mass, and acceleration are torque, moment of inertia, and angular acceleration, respectively.
Definition and relation to angular momentum
A particle is located at position r relative to its axis of rotation. When a force F is applied to the particle, only the perpendicular component F⊥ produces a torque. This torque τ = r × F has magnitude τ = r F⊥ = r F sinθ and is directed outward from the page.
Torque is defined about a point not specifically about axis as mentioned in several books.
A force applied at a right angle to a lever multiplied by its distance from the lever's fulcrum (the length of the lever arm) is its torque. A force of three newtons applied two metres from the fulcrum, for example, exerts the same torque as a force of one newton applied six metres from the fulcrum. The direction of the torque can be determined by using the right hand grip rule: if the fingers of the right hand curl in the direction of rotation and the thumb points along the axis of rotation, then the thumb also points in the direction of the torque.[5]
More generally, the torque on a particle (which has the position r in some reference frame) can be defined as the cross product:
\boldsymbol{\tau} = \mathbf{r} \times \mathbf{F},
where r is the particle's position vector relative to the fulcrum, and F is the force acting on the particle. The magnitude τ of the torque is given by
\tau = rF\sin\theta,\!
where r is the distance from the axis of rotation to the particle, F is the magnitude of the force applied, and θ is the angle between the position and force vectors. Alternatively,
\tau = rF_{\perp},
where F⊥ is the amount of force directed perpendicularly to the position of the particle. Any force directed parallel to the particle's position vector does not produce a torque.[6]
It follows from the properties of the cross product that the torque vector is perpendicular to both the position and force vectors. It points along the axis of rotation, and its direction is determined by the righthand rule.[6]
The unbalanced torque on a body along axis of rotation determines the rate of change of the body's angular momentum,
\boldsymbol{\tau} = \frac{\mathrm{d}\mathbf{L}}{\mathrm{d}t}
where L is the angular momentum vector and t is time. If multiple torques are acting on the body, it is instead the net torque which determines the rate of change of the angular momentum:
\boldsymbol{\tau}_1 + \cdots + \boldsymbol{\tau}_n = \boldsymbol{\tau}_{\mathrm{net}} = \frac{\mathrm{d}\mathbf{L}}{\mathrm{d}t}.
For rotation about a fixed axis,
\mathbf{L} = I\boldsymbol{\omega},
where I is the moment of inertia and ω is the angular velocity. It follows that
\boldsymbol{\tau}_{\mathrm{net}} = \frac{\mathrm{d}\mathbf{L}}{\mathrm{d}t} = \frac{\mathrm{d}(I\boldsymbol{\omega})}{\mathrm{d}t} = I\frac{\mathrm{d}\boldsymbol{\omega}}{\mathrm{d}t} = I\boldsymbol{\alpha},
where α is the angular acceleration of the body, measured in rad·s−2.This equation has limitation that torque equation is to be only written about instantaneous axis of rotation or center of mass for any type of motioneither motion is pure translation,pure rotation or mixed motion.I=Moment of inertia about point about which torque is written(either about instantaneous axis of rotation or center of mass only). If body is in translatory equilibrium then torque equation is same about all points in plane of motion.
Proof of the equivalence of definitions for a fixed instantaneous centre of rotation
The definition of angular momentum for a single particle is:
\mathbf{L} = \mathbf{r} \times \mathbf{p}
where "×" indicates the vector cross product and p is the particle's linear momentum. The timederivative of this is:
\frac{d\mathbf{L}}{dt} = \mathbf{r} \times \frac{d\mathbf{p}}{dt} + \frac{d\mathbf{r}}{dt} \times \mathbf{p}.
This result can easily be proven by splitting the vectors into components and applying the product rule. Now using the definitions of velocity v = dr/dt, acceleration a = dv/dt and linear momentum p = mv (if mass is constant),
\frac{d\mathbf{L}}{dt} = \mathbf{r} \times m \frac{d\mathbf{v}}{dt} + \mathbf{v} \times m\mathbf{v}.
The cross product of any vector with itself is zero, so the second term vanishes. Hence with the definition of force F = ma (Newton's 2nd law),
\frac{d\mathbf{L}}{dt} = \mathbf{r} \times \mathbf{F}.
Then by definition, torque τ = r × F.
If multiple forces are applied, Newton's second law instead reads Fnet = ma, and it follows that
\frac{d\mathbf{L}}{dt} = \mathbf{r} \times \mathbf{F}_{\mathrm{net}} = \boldsymbol{\tau}_{\mathrm{net}}.
The proof relies on the assumption that mass is constant; this is valid only in nonrelativistic systems in which no mass is being ejected.
Units
Torque has dimensions of force times distance. Official SI literature suggests using the unit newton metre (N·m) or the unit joule per radian.[7] The unit newton metre is properly denoted N·m or N m.[8] This avoids ambiguity with mN, millinewtons.
The joule, which is the SI unit for energy or work, is dimensionally equivalent to a newton metre, but it is not used for torque. Energy and torque are entirely different concepts, so the practice of using different unit names for them helps avoid mistakes and misunderstandings.[7] The dimensional equivalence of these units, of course, is not simply a coincidence: A torque of 1 N·m applied through a full revolution will require an energy of exactly 2π joules. Mathematically,
E= \tau \theta\
where E is the energy, τ is magnitude of the torque, and θ is the angle moved (in radians). This equation motivates the alternate unit name joules per radian.[7]
In British unit, "poundforcefeet" (lbf x ft), "footpoundsforce", "inchpoundsforce", "ounceforceinches" (oz x in) are used, and other nonSI units of torque includes "metrekilogramsforce". For all these units, the word "force" is often left out,[9] for example abbreviating "poundforcefoot" to simply "poundfoot" (in this case, it would be implicit that the "pound" is poundforce and not poundmass).
Sometimes one may see torque given units that don't dimensionally make sense. For example: g x cm . In these units, g should be understood as the force given by the weight of 1 gram at the surface of the earth. The surface of the earth is understood to have an average acceleration of gravity (approx. 9.80665 m/sec2).
Special cases and other facts
Moment arm formula
Moment arm diagram
A very useful special case, often given as the definition of torque in fields other than physics, is as follows:
\tau = (\textrm{moment\ arm}) (\textrm{force}).
The construction of the "moment arm" is shown in the figure to the right, along with the vectors r and F mentioned above. The problem with this definition is that it does not give the direction of the torque but only the magnitude, and hence it is difficult to use in threedimensional cases. If the force is perpendicular to the displacement vector r, the moment arm will be equal to the distance to the centre, and torque will be a maximum for the given force. The equation for the magnitude of a torque, arising from a perpendicular force:
\tau = (\textrm{distance\ to\ centre}) (\textrm{force}).
For example, if a person places a force of 10 N on a spanner (wrench) which is 0.5 m long, the torque will be 5 N m, assuming that the person pulls the spanner by applying force perpendicular to the spanner.
The torque caused by the two opposing forces Fg and −Fg causes a change in the angular momentum L in the direction of that torque. This causes the top to precess.
Static equilibrium
For an object to be in static equilibrium, not only must the sum of the forces be zero, but also the sum of the torques (moments) about any point. For a twodimensional situation with horizontal and vertical forces, the sum of the forces requirement is two equations: ΣH = 0 and ΣV = 0, and the torque a third equation: Στ = 0. That is, to solve statically determinate equilibrium problems in twodimensions, we use three equations.
Net force versus torque
When the net force on the system is zero, the torque measured from any point in space is the same. For example, the torque on a currentcarrying loop in a uniform magnetic field is the same regardless of your point of reference. If the net force \mathbf{F} is not zero, and \mathbf{\tau}_1 is the torque measured from \mathbf{r}_1, then the torque measured from \mathbf{r}_2 is \mathbf{\tau}_2 = \mathbf{\tau}_1 + (\mathbf{r}_1  \mathbf{r}_2) \times \mathbf{F}
Machine torque
Torque curve of a motorcycle ("BMW K 1200 R 2005"). The horizontal axis is the speed (in rpm) that the crankshaft is turning, and the vertical axis is the torque (in Newton metres) that the engine is capable of providing at that speed.
Torque is part of the basic specification of an engine: the power output of an engine is expressed as its torque multiplied by its rotational speed of the axis. Internalcombustion engines produce useful torque only over a limited range of rotational speeds (typically from around 1,000–6,000 rpm for a small car). The varying torque output over that range can be measured with a dynamometer, and shown as a torque curve. The peak of that torque curve occurs somewhat below the overall power peak. The torque peak cannot, by definition, appear at higher rpm than the power peak.
Understanding the relationship between torque, power and engine speed is vital in automotive engineering, concerned as it is with transmitting power from the engine through the drive train to the wheels. Power is a function of torque and engine speed. The gearing of the drive train must be chosen appropriately to make the most of the motor's torque characteristics. Power at the drive wheels is equal to engine power less mechanical losses regardless of any gearing between the engine and drive wheels.
Steam engines and electric motors tend to produce maximum torque close to zero rpm, with the torque diminishing as rotational speed rises (due to increasing friction and other constraints). Reciprocating steam engines can start heavy loads from zero RPM without a clutch.
Relationship between torque, power and energy
If a force is allowed to act through a distance, it is doing mechanical work. Similarly, if torque is allowed to act through a rotational distance, it is doing work. Mathematically, for rotation about a fixed axis through the center of mass,
W = \int_{\theta_1}^{\theta_2} \tau\ \mathrm{d}\theta,
where W is work, τ is torque, and θ1 and θ2 represent (respectively) the initial and final angular positions of the body.[10] It follows from the workenergy theorem that W also represents the change in the rotational kinetic energy Krot of the body, given by
K_{\mathrm{rot}} = \tfrac{1}{2}I\omega^2,
where I is the moment of inertia of the body and ω is its angular speed.[10]
Power is the work per unit time, given by
P = \boldsymbol{\tau} \cdot \boldsymbol{\omega},
where P is power, τ is torque, ω is the angular velocity, and · represents the scalar product.
Mathematically, the equation may be rearranged to compute torque for a given power output. Note that the power injected by the torque depends only on the instantaneous angular speed – not on whether the angular speed increases, decreases, or remains constant while the torque is being applied (this is equivalent to the linear case where the power injected by a force depends only on the instantaneous speed – not on the resulting acceleration, if any).
In practice, this relationship can be observed in power stations which are connected to a large electrical power grid. In such an arrangement, the generator's angular speed is fixed by the grid's frequency, and the power output of the plant is determined by the torque applied to the generator's axis of rotation.
Consistent units must be used. For metric SI units power is watts, torque is newton metres and angular speed is radians per second (not rpm and not revolutions per second).
Also, the unit newton metre is dimensionally equivalent to the joule, which is the unit of energy. However, in the case of torque, the unit is assigned to a vector, whereas for energy, it is assigned to a scalar.
Conversion to other units
A conversion factor may be necessary when using different units of power, torque, or angular speed. For example, if rotational speed (revolutions per time) is used in place of angular speed (radians per time), we multiply by a factor of 2π radians per revolution.
\mbox{power} = \mbox{torque} \times 2 \pi \times \mbox{rotational speed}
Adding units:
\mbox{power (W)} = \mbox{torque (N}\cdot\mbox{m)} \times 2 \pi \times \mbox{rotational speed (rps)}
Dividing on the left by 60 seconds per minute and by 1000 watts per kilowatt gives us the following.
\mbox{power (kW)} = \frac{ \mbox{torque (N}\cdot\mbox{m)} \times 2 \pi \times \mbox{rotational speed (rpm)}} {60000}
where rotational speed is in revolutions per minute (rpm).
Some people (e.g. American automotive engineers) use horsepower (imperial mechanical) for power, footpounds (lbf·ft) for torque and rpm for rotational speed. This results in the formula changing to:
\mbox{power (hp)} = \frac{ \mbox{torque(lbf}\cdot\mbox{ft)} \times 2 \pi \times \mbox{rotational speed (rpm)} }{33000}.
The constant below in, ft·lbf/min, changes with the definition of the horsepower; for example, using metric horsepower, it becomes ~32,550.
Use of other units (e.g. BTU/h for power) would require a different custom conversion factor.
Derivation
For a rotating object, the linear distance covered at the circumference in a radian of rotation is the product of the radius with the angular speed. That is: linear speed = radius × angular speed. By definition, linear distance=linear speed × time=radius × angular speed × time.
By the definition of torque: torque=force × radius. We can rearrange this to determine force=torque ÷ radius. These two values can be substituted into the definition of power:
\mbox{power} = \frac{\mbox{force} \times \mbox{linear distance}}{\mbox{time}}=\frac{\left(\frac{\mbox{torque}}{\displaystyle{r}}\right) \times (r \times \mbox{angular speed} \times t)} {t} = \mbox{torque} \times \mbox{angular speed}.
The radius r and time t have dropped out of the equation. However angular speed must be in radians, by the assumed direct relationship between linear speed and angular speed at the beginning of the derivation. If the rotational speed is measured in revolutions per unit of time, the linear speed and distance are increased proportionately by 2π in the above derivation to give;[/spoiler]
[spoiler]Torque, also called moment or moment of force (see the terminology below), is the tendency of a force to rotate an object about an axis,[1] fulcrum, or pivot. Just as a force is a push or a pull, a torque can be thought of as a twist.
Loosely speaking, torque is a measure of the turning force on an object such as a bolt or a flywheel. For example, pushing or pulling the handle of a wrench connected to a nut or bolt produces a torque (turning force) that loosens or tightens the nut or bolt.
The terminology for this concept is not straightforward: In the US, in physics it is usually called "torque" and in mechanical engineering it is called "moment".[2] However outside the US this varies. In the UK for instance, most physicists will use the term "moment". In mechanical engineering, the term "torque" means something different,[3] described below. In this article the word "torque" is always used to mean the same as "moment".
The symbol for torque is typically τ, the Greek letter tau. When it is called moment, it is commonly denoted M.
The magnitude of torque depends on three quantities: the force applied, the length of the lever arm[4] connecting the axis to the point of force application, and the angle between the force vector and the lever arm. In symbols:
\boldsymbol \tau = \mathbf{r}\times \mathbf{F}\,\!
\tau = rF\sin \theta\,\!
where
τ is the torque vector and τ is the magnitude of the torque,
r is the displacement vector (a vector from the point from which torque is measured to the point where force is applied), and r is the length (or magnitude) of the lever arm vector,
F is the force vector, and F is the magnitude of the force,
× denotes the cross product,
θ is the angle between the force vector and the lever arm vector.
The length of the lever arm is particularly important; choosing this length appropriately lies behind the operation of levers, pulleys, gears, and most other simple machines involving a mechanical advantage.
The SI unit for torque is the newton metre (N·m). For more on the units of torque, see below.
Contents
[hide]
1 Terminology
2 History
3 Definition and relation to angular momentum
3.1 Proof of the equivalence of definitions for a fixed instantaneous centre of rotation
4 Units
5 Special cases and other facts
5.1 Moment arm formula
5.2 Static equilibrium
5.3 Net force versus torque
6 Machine torque
7 Relationship between torque, power and energy
7.1 Conversion to other units
7.2 Derivation
8 Principle of moments
9 Torque multiplier
10 See also
11 References
12 External links
Terminology
See also: Couple (mechanics)
In mechanical engineering (unlike physics), the terms "torque" and "moment" are not interchangeable. "Moment" is the general term for the tendency of one or more applied forces to rotate an object about an axis (the concept which in physics is called torque).[3] "Torque" is a special case of this: If the applied force vectors add to zero (i.e., their "resultant" is zero), then the forces are called a "couple" and their moment is called a "torque".[3]
For example, a rotational force down a shaft, such as a turning screwdriver, forms a couple, so the resulting moment is called a "torque". By contrast, a lateral force on a beam produces a moment (called a bending moment), but since the net force is nonzero, this bending moment is not called a "torque".
This article follows physics terminology by calling all moments by the term "torque", whether or not they are associated with a couple.
History
The concept of torque, also called moment or couple, originated with the studies of Archimedes on levers. The rotational analogues of force, mass, and acceleration are torque, moment of inertia, and angular acceleration, respectively.
Definition and relation to angular momentum
A particle is located at position r relative to its axis of rotation. When a force F is applied to the particle, only the perpendicular component F⊥ produces a torque. This torque τ = r × F has magnitude τ = r F⊥ = r F sinθ and is directed outward from the page.
Torque is defined about a point not specifically about axis as mentioned in several books.
A force applied at a right angle to a lever multiplied by its distance from the lever's fulcrum (the length of the lever arm) is its torque. A force of three newtons applied two metres from the fulcrum, for example, exerts the same torque as a force of one newton applied six metres from the fulcrum. The direction of the torque can be determined by using the right hand grip rule: if the fingers of the right hand curl in the direction of rotation and the thumb points along the axis of rotation, then the thumb also points in the direction of the torque.[5]
More generally, the torque on a particle (which has the position r in some reference frame) can be defined as the cross product:
\boldsymbol{\tau} = \mathbf{r} \times \mathbf{F},
where r is the particle's position vector relative to the fulcrum, and F is the force acting on the particle. The magnitude τ of the torque is given by
\tau = rF\sin\theta,\!
where r is the distance from the axis of rotation to the particle, F is the magnitude of the force applied, and θ is the angle between the position and force vectors. Alternatively,
\tau = rF_{\perp},
where F⊥ is the amount of force directed perpendicularly to the position of the particle. Any force directed parallel to the particle's position vector does not produce a torque.[6]
It follows from the properties of the cross product that the torque vector is perpendicular to both the position and force vectors. It points along the axis of rotation, and its direction is determined by the righthand rule.[6]
The unbalanced torque on a body along axis of rotation determines the rate of change of the body's angular momentum,
\boldsymbol{\tau} = \frac{\mathrm{d}\mathbf{L}}{\mathrm{d}t}
where L is the angular momentum vector and t is time. If multiple torques are acting on the body, it is instead the net torque which determines the rate of change of the angular momentum:
\boldsymbol{\tau}_1 + \cdots + \boldsymbol{\tau}_n = \boldsymbol{\tau}_{\mathrm{net}} = \frac{\mathrm{d}\mathbf{L}}{\mathrm{d}t}.
For rotation about a fixed axis,
\mathbf{L} = I\boldsymbol{\omega},
where I is the moment of inertia and ω is the angular velocity. It follows that
\boldsymbol{\tau}_{\mathrm{net}} = \frac{\mathrm{d}\mathbf{L}}{\mathrm{d}t} = \frac{\mathrm{d}(I\boldsymbol{\omega})}{\mathrm{d}t} = I\frac{\mathrm{d}\boldsymbol{\omega}}{\mathrm{d}t} = I\boldsymbol{\alpha},
where α is the angular acceleration of the body, measured in rad·s−2.This equation has limitation that torque equation is to be only written about instantaneous axis of rotation or center of mass for any type of motioneither motion is pure translation,pure rotation or mixed motion.I=Moment of inertia about point about which torque is written(either about instantaneous axis of rotation or center of mass only). If body is in translatory equilibrium then torque equation is same about all points in plane of motion.
Proof of the equivalence of definitions for a fixed instantaneous centre of rotation
The definition of angular momentum for a single particle is:
\mathbf{L} = \mathbf{r} \times \mathbf{p}
where "×" indicates the vector cross product and p is the particle's linear momentum. The timederivative of this is:
\frac{d\mathbf{L}}{dt} = \mathbf{r} \times \frac{d\mathbf{p}}{dt} + \frac{d\mathbf{r}}{dt} \times \mathbf{p}.
This result can easily be proven by splitting the vectors into components and applying the product rule. Now using the definitions of velocity v = dr/dt, acceleration a = dv/dt and linear momentum p = mv (if mass is constant),
\frac{d\mathbf{L}}{dt} = \mathbf{r} \times m \frac{d\mathbf{v}}{dt} + \mathbf{v} \times m\mathbf{v}.
The cross product of any vector with itself is zero, so the second term vanishes. Hence with the definition of force F = ma (Newton's 2nd law),
\frac{d\mathbf{L}}{dt} = \mathbf{r} \times \mathbf{F}.
Then by definition, torque τ = r × F.
If multiple forces are applied, Newton's second law instead reads Fnet = ma, and it follows that
\frac{d\mathbf{L}}{dt} = \mathbf{r} \times \mathbf{F}_{\mathrm{net}} = \boldsymbol{\tau}_{\mathrm{net}}.
The proof relies on the assumption that mass is constant; this is valid only in nonrelativistic systems in which no mass is being ejected.
Units
Torque has dimensions of force times distance. Official SI literature suggests using the unit newton metre (N·m) or the unit joule per radian.[7] The unit newton metre is properly denoted N·m or N m.[8] This avoids ambiguity with mN, millinewtons.
The joule, which is the SI unit for energy or work, is dimensionally equivalent to a newton metre, but it is not used for torque. Energy and torque are entirely different concepts, so the practice of using different unit names for them helps avoid mistakes and misunderstandings.[7] The dimensional equivalence of these units, of course, is not simply a coincidence: A torque of 1 N·m applied through a full revolution will require an energy of exactly 2π joules. Mathematically,
E= \tau \theta\
where E is the energy, τ is magnitude of the torque, and θ is the angle moved (in radians). This equation motivates the alternate unit name joules per radian.[7]
In British unit, "poundforcefeet" (lbf x ft), "footpoundsforce", "inchpoundsforce", "ounceforceinches" (oz x in) are used, and other nonSI units of torque includes "metrekilogramsforce". For all these units, the word "force" is often left out,[9] for example abbreviating "poundforcefoot" to simply "poundfoot" (in this case, it would be implicit that the "pound" is poundforce and not poundmass).
Sometimes one may see torque given units that don't dimensionally make sense. For example: g x cm . In these units, g should be understood as the force given by the weight of 1 gram at the surface of the earth. The surface of the earth is understood to have an average acceleration of gravity (approx. 9.80665 m/sec2).
Special cases and other facts
Moment arm formula
Moment arm diagram
A very useful special case, often given as the definition of torque in fields other than physics, is as follows:
\tau = (\textrm{moment\ arm}) (\textrm{force}).
The construction of the "moment arm" is shown in the figure to the right, along with the vectors r and F mentioned above. The problem with this definition is that it does not give the direction of the torque but only the magnitude, and hence it is difficult to use in threedimensional cases. If the force is perpendicular to the displacement vector r, the moment arm will be equal to the distance to the centre, and torque will be a maximum for the given force. The equation for the magnitude of a torque, arising from a perpendicular force:
\tau = (\textrm{distance\ to\ centre}) (\textrm{force}).
For example, if a person places a force of 10 N on a spanner (wrench) which is 0.5 m long, the torque will be 5 N m, assuming that the person pulls the spanner by applying force perpendicular to the spanner.
The torque caused by the two opposing forces Fg and −Fg causes a change in the angular momentum L in the direction of that torque. This causes the top to precess.
Static equilibrium
For an object to be in static equilibrium, not only must the sum of the forces be zero, but also the sum of the torques (moments) about any point. For a twodimensional situation with horizontal and vertical forces, the sum of the forces requirement is two equations: ΣH = 0 and ΣV = 0, and the torque a third equation: Στ = 0. That is, to solve statically determinate equilibrium problems in twodimensions, we use three equations.
Net force versus torque
When the net force on the system is zero, the torque measured from any point in space is the same. For example, the torque on a currentcarrying loop in a uniform magnetic field is the same regardless of your point of reference. If the net force \mathbf{F} is not zero, and \mathbf{\tau}_1 is the torque measured from \mathbf{r}_1, then the torque measured from \mathbf{r}_2 is \mathbf{\tau}_2 = \mathbf{\tau}_1 + (\mathbf{r}_1  \mathbf{r}_2) \times \mathbf{F}
Machine torque
Torque curve of a motorcycle ("BMW K 1200 R 2005"). The horizontal axis is the speed (in rpm) that the crankshaft is turning, and the vertical axis is the torque (in Newton metres) that the engine is capable of providing at that speed.
Torque is part of the basic specification of an engine: the power output of an engine is expressed as its torque multiplied by its rotational speed of the axis. Internalcombustion engines produce useful torque only over a limited range of rotational speeds (typically from around 1,000–6,000 rpm for a small car). The varying torque output over that range can be measured with a dynamometer, and shown as a torque curve. The peak of that torque curve occurs somewhat below the overall power peak. The torque peak cannot, by definition, appear at higher rpm than the power peak.
Understanding the relationship between torque, power and engine speed is vital in automotive engineering, concerned as it is with transmitting power from the engine through the drive train to the wheels. Power is a function of torque and engine speed. The gearing of the drive train must be chosen appropriately to make the most of the motor's torque characteristics. Power at the drive wheels is equal to engine power less mechanical losses regardless of any gearing between the engine and drive wheels.
Steam engines and electric motors tend to produce maximum torque close to zero rpm, with the torque diminishing as rotational speed rises (due to increasing friction and other constraints). Reciprocating steam engines can start heavy loads from zero RPM without a clutch.
Relationship between torque, power and energy
If a force is allowed to act through a distance, it is doing mechanical work. Similarly, if torque is allowed to act through a rotational distance, it is doing work. Mathematically, for rotation about a fixed axis through the center of mass,
W = \int_{\theta_1}^{\theta_2} \tau\ \mathrm{d}\theta,
where W is work, τ is torque, and θ1 and θ2 represent (respectively) the initial and final angular positions of the body.[10] It follows from the workenergy theorem that W also represents the change in the rotational kinetic energy Krot of the body, given by
K_{\mathrm{rot}} = \tfrac{1}{2}I\omega^2,
where I is the moment of inertia of the body and ω is its angular speed.[10]
Power is the work per unit time, given by
P = \boldsymbol{\tau} \cdot \boldsymbol{\omega},
where P is power, τ is torque, ω is the angular velocity, and · represents the scalar product.
Mathematically, the equation may be rearranged to compute torque for a given power output. Note that the power injected by the torque depends only on the instantaneous angular speed – not on whether the angular speed increases, decreases, or remains constant while the torque is being applied (this is equivalent to the linear case where the power injected by a force depends only on the instantaneous speed – not on the resulting acceleration, if any).
In practice, this relationship can be observed in power stations which are connected to a large electrical power grid. In such an arrangement, the generator's angular speed is fixed by the grid's frequency, and the power output of the plant is determined by the torque applied to the generator's axis of rotation.
Consistent units must be used. For metric SI units power is watts, torque is newton metres and angular speed is radians per second (not rpm and not revolutions per second).
Also, the unit newton metre is dimensionally equivalent to the joule, which is the unit of energy. However, in the case of torque, the unit is assigned to a vector, whereas for energy, it is assigned to a scalar.
Conversion to other units
A conversion factor may be necessary when using different units of power, torque, or angular speed. For example, if rotational speed (revolutions per time) is used in place of angular speed (radians per time), we multiply by a factor of 2π radians per revolution.
\mbox{power} = \mbox{torque} \times 2 \pi \times \mbox{rotational speed}
Adding units:
\mbox{power (W)} = \mbox{torque (N}\cdot\mbox{m)} \times 2 \pi \times \mbox{rotational speed (rps)}
Dividing on the left by 60 seconds per minute and by 1000 watts per kilowatt gives us the following.
\mbox{power (kW)} = \frac{ \mbox{torque (N}\cdot\mbox{m)} \times 2 \pi \times \mbox{rotational speed (rpm)}} {60000}
where rotational speed is in revolutions per minute (rpm).
Some people (e.g. American automotive engineers) use horsepower (imperial mechanical) for power, footpounds (lbf·ft) for torque and rpm for rotational speed. This results in the formula changing to:
\mbox{power (hp)} = \frac{ \mbox{torque(lbf}\cdot\mbox{ft)} \times 2 \pi \times \mbox{rotational speed (rpm)} }{33000}.
The constant below in, ft·lbf/min, changes with the definition of the horsepower; for example, using metric horsepower, it becomes ~32,550.
Use of other units (e.g. BTU/h for power) would require a different custom conversion factor.
Derivation
For a rotating object, the linear distance covered at the circumference in a radian of rotation is the product of the radius with the angular speed. That is: linear speed = radius × angular speed. By definition, linear distance=linear speed × time=radius × angular speed × time.
By the definition of torque: torque=force × radius. We can rearrange this to determine force=torque ÷ radius. These two values can be substituted into the definition of power:
\mbox{power} = \frac{\mbox{force} \times \mbox{linear distance}}{\mbox{time}}=\frac{\left(\frac{\mbox{torque}}{\displaystyle{r}}\right) \times (r \times \mbox{angular speed} \times t)} {t} = \mbox{torque} \times \mbox{angular speed}.
The radius r and time t have dropped out of the equation. However angular speed must be in radians, by the assumed direct relationship between linear speed and angular speed at the beginning of the derivation. If the rotational speed is measured in revolutions per unit of time, the linear speed and distance are increased proportionately by 2π in the above derivation to give:
\mbox{power}=\mbox{torque} \times 2 \pi \times \mbox{rotational speed}. \,
If torque is in lbf·ft and rotational speed in revolutions per minute, the above equation gives power in ft·lbf/min. The horsepower form of the equation is then derived by applying the conversion factor 33000 ft·lbf/min per horsepower:
\mbox{power} = \mbox{torque } \times\ 2 \pi\ \times \mbox{ rotational speed} \cdot \frac{\mbox{ft}\cdot\mbox{lbf}}{\mbox{min}} \times \frac{\mbox{horsepower}}{33000 \cdot \frac{\mbox{ft }\cdot\mbox{ lbf}}{\mbox{min}} } \approx \frac {\mbox{torque} \times \mbox{RPM}}{5252}
because 5252.113122... = \frac {33000} {2 \pi}. \,
Principle of moments
The Principle of Moments, also known as Varignon's theorem (not to be confused with the geometrical theorem of the same name) states that the sum of torques due to several forces applied to a single point is equal to the torque due to the sum (resultant) of the forces. Mathematically, this follows from:
(\mathbf{r}\times\mathbf{F}_1) + (\mathbf{r}\times\mathbf{F}_2) + \cdots = \mathbf{r}\times(\mathbf{F}_1+\mathbf{F}_2 + \cdots).
Torque multiplier
A torque multiplier is a gear box, which works on the principle of epicyclic gearing. The given load at the input gets multiplied as per the multiplication factor and transmitted to the output, thereby achieving greater load with minimal effort.
sumber wikipediaGuntap...
kalau ikut ni penerangan pening jg tu kepala mo pikir...sinang cerita torque kekuatan tu injin tarik tu badan kereta
Torque, also called moment or moment of force (see the terminology below), is the tendency of a force to rotate an object about an axis,[1] fulcrum, or pivot. Just as a force is a push or a pull, a torque can be thought of as a twist.
Loosely speaking, torque is a measure of the turning force on an object such as a bolt or a flywheel. For example, pushing or pulling the handle of a wrench connected to a nut or bolt produces a torque (turning force) that loosens or tightens the nut or bolt.
The terminology for this concept is not straightforward: In the US, in physics it is usually called "torque" and in mechanical engineering it is called "moment".[2] However outside the US this varies. In the UK for instance, most physicists will use the term "moment". In mechanical engineering, the term "torque" means something different,[3] described below. In this article the word "torque" is always used to mean the same as "moment".
The symbol for torque is typically τ, the Greek letter tau. When it is called moment, it is commonly denoted M.
The magnitude of torque depends on three quantities: the force applied, the length of the lever arm[4] connecting the axis to the point of force application, and the angle between the force vector and the lever arm. In symbols:
\boldsymbol \tau = \mathbf{r}\times \mathbf{F}\,\!
\tau = rF\sin \theta\,\!
where
τ is the torque vector and τ is the magnitude of the torque,
r is the displacement vector (a vector from the point from which torque is measured to the point where force is applied), and r is the length (or magnitude) of the lever arm vector,
F is the force vector, and F is the magnitude of the force,
× denotes the cross product,
θ is the angle between the force vector and the lever arm vector.
The length of the lever arm is particularly important; choosing this length appropriately lies behind the operation of levers, pulleys, gears, and most other simple machines involving a mechanical advantage.
The SI unit for torque is the newton metre (N·m). For more on the units of torque, see below.
Contents
[hide]
1 Terminology
2 History
3 Definition and relation to angular momentum
3.1 Proof of the equivalence of definitions for a fixed instantaneous centre of rotation
4 Units
5 Special cases and other facts
5.1 Moment arm formula
5.2 Static equilibrium
5.3 Net force versus torque
6 Machine torque
7 Relationship between torque, power and energy
7.1 Conversion to other units
7.2 Derivation
8 Principle of moments
9 Torque multiplier
10 See also
11 References
12 External links
Terminology
See also: Couple (mechanics)
In mechanical engineering (unlike physics), the terms "torque" and "moment" are not interchangeable. "Moment" is the general term for the tendency of one or more applied forces to rotate an object about an axis (the concept which in physics is called torque).[3] "Torque" is a special case of this: If the applied force vectors add to zero (i.e., their "resultant" is zero), then the forces are called a "couple" and their moment is called a "torque".[3]
For example, a rotational force down a shaft, such as a turning screwdriver, forms a couple, so the resulting moment is called a "torque". By contrast, a lateral force on a beam produces a moment (called a bending moment), but since the net force is nonzero, this bending moment is not called a "torque".
This article follows physics terminology by calling all moments by the term "torque", whether or not they are associated with a couple.
History
The concept of torque, also called moment or couple, originated with the studies of Archimedes on levers. The rotational analogues of force, mass, and acceleration are torque, moment of inertia, and angular acceleration, respectively.
Definition and relation to angular momentum
A particle is located at position r relative to its axis of rotation. When a force F is applied to the particle, only the perpendicular component F⊥ produces a torque. This torque τ = r × F has magnitude τ = r F⊥ = r F sinθ and is directed outward from the page.
Torque is defined about a point not specifically about axis as mentioned in several books.
A force applied at a right angle to a lever multiplied by its distance from the lever's fulcrum (the length of the lever arm) is its torque. A force of three newtons applied two metres from the fulcrum, for example, exerts the same torque as a force of one newton applied six metres from the fulcrum. The direction of the torque can be determined by using the right hand grip rule: if the fingers of the right hand curl in the direction of rotation and the thumb points along the axis of rotation, then the thumb also points in the direction of the torque.[5]
More generally, the torque on a particle (which has the position r in some reference frame) can be defined as the cross product:
\boldsymbol{\tau} = \mathbf{r} \times \mathbf{F},
where r is the particle's position vector relative to the fulcrum, and F is the force acting on the particle. The magnitude τ of the torque is given by
\tau = rF\sin\theta,\!
where r is the distance from the axis of rotation to the particle, F is the magnitude of the force applied, and θ is the angle between the position and force vectors. Alternatively,
\tau = rF_{\perp},
where F⊥ is the amount of force directed perpendicularly to the position of the particle. Any force directed parallel to the particle's position vector does not produce a torque.[6]
It follows from the properties of the cross product that the torque vector is perpendicular to both the position and force vectors. It points along the axis of rotation, and its direction is determined by the righthand rule.[6]
The unbalanced torque on a body along axis of rotation determines the rate of change of the body's angular momentum,
\boldsymbol{\tau} = \frac{\mathrm{d}\mathbf{L}}{\mathrm{d}t}
where L is the angular momentum vector and t is time. If multiple torques are acting on the body, it is instead the net torque which determines the rate of change of the angular momentum:
\boldsymbol{\tau}_1 + \cdots + \boldsymbol{\tau}_n = \boldsymbol{\tau}_{\mathrm{net}} = \frac{\mathrm{d}\mathbf{L}}{\mathrm{d}t}.
For rotation about a fixed axis,
\mathbf{L} = I\boldsymbol{\omega},
where I is the moment of inertia and ω is the angular velocity. It follows that
\boldsymbol{\tau}_{\mathrm{net}} = \frac{\mathrm{d}\mathbf{L}}{\mathrm{d}t} = \frac{\mathrm{d}(I\boldsymbol{\omega})}{\mathrm{d}t} = I\frac{\mathrm{d}\boldsymbol{\omega}}{\mathrm{d}t} = I\boldsymbol{\alpha},
where α is the angular acceleration of the body, measured in rad·s−2.This equation has limitation that torque equation is to be only written about instantaneous axis of rotation or center of mass for any type of motioneither motion is pure translation,pure rotation or mixed motion.I=Moment of inertia about point about which torque is written(either about instantaneous axis of rotation or center of mass only). If body is in translatory equilibrium then torque equation is same about all points in plane of motion.
Proof of the equivalence of definitions for a fixed instantaneous centre of rotation
The definition of angular momentum for a single particle is:
\mathbf{L} = \mathbf{r} \times \mathbf{p}
where "×" indicates the vector cross product and p is the particle's linear momentum. The timederivative of this is:
\frac{d\mathbf{L}}{dt} = \mathbf{r} \times \frac{d\mathbf{p}}{dt} + \frac{d\mathbf{r}}{dt} \times \mathbf{p}.
This result can easily be proven by splitting the vectors into components and applying the product rule. Now using the definitions of velocity v = dr/dt, acceleration a = dv/dt and linear momentum p = mv (if mass is constant),
\frac{d\mathbf{L}}{dt} = \mathbf{r} \times m \frac{d\mathbf{v}}{dt} + \mathbf{v} \times m\mathbf{v}.
The cross product of any vector with itself is zero, so the second term vanishes. Hence with the definition of force F = ma (Newton's 2nd law),
\frac{d\mathbf{L}}{dt} = \mathbf{r} \times \mathbf{F}.
Then by definition, torque τ = r × F.
If multiple forces are applied, Newton's second law instead reads Fnet = ma, and it follows that
\frac{d\mathbf{L}}{dt} = \mathbf{r} \times \mathbf{F}_{\mathrm{net}} = \boldsymbol{\tau}_{\mathrm{net}}.
The proof relies on the assumption that mass is constant; this is valid only in nonrelativistic systems in which no mass is being ejected.
Units
Torque has dimensions of force times distance. Official SI literature suggests using the unit newton metre (N·m) or the unit joule per radian.[7] The unit newton metre is properly denoted N·m or N m.[8] This avoids ambiguity with mN, millinewtons.
The joule, which is the SI unit for energy or work, is dimensionally equivalent to a newton metre, but it is not used for torque. Energy and torque are entirely different concepts, so the practice of using different unit names for them helps avoid mistakes and misunderstandings.[7] The dimensional equivalence of these units, of course, is not simply a coincidence: A torque of 1 N·m applied through a full revolution will require an energy of exactly 2π joules. Mathematically,
E= \tau \theta\
where E is the energy, τ is magnitude of the torque, and θ is the angle moved (in radians). This equation motivates the alternate unit name joules per radian.[7]
In British unit, "poundforcefeet" (lbf x ft), "footpoundsforce", "inchpoundsforce", "ounceforceinches" (oz x in) are used, and other nonSI units of torque includes "metrekilogramsforce". For all these units, the word "force" is often left out,[9] for example abbreviating "poundforcefoot" to simply "poundfoot" (in this case, it would be implicit that the "pound" is poundforce and not poundmass).
Sometimes one may see torque given units that don't dimensionally make sense. For example: g x cm . In these units, g should be understood as the force given by the weight of 1 gram at the surface of the earth. The surface of the earth is understood to have an average acceleration of gravity (approx. 9.80665 m/sec2).
Special cases and other facts
Moment arm formula
Moment arm diagram
A very useful special case, often given as the definition of torque in fields other than physics, is as follows:
\tau = (\textrm{moment\ arm}) (\textrm{force}).
The construction of the "moment arm" is shown in the figure to the right, along with the vectors r and F mentioned above. The problem with this definition is that it does not give the direction of the torque but only the magnitude, and hence it is difficult to use in threedimensional cases. If the force is perpendicular to the displacement vector r, the moment arm will be equal to the distance to the centre, and torque will be a maximum for the given force. The equation for the magnitude of a torque, arising from a perpendicular force:
\tau = (\textrm{distance\ to\ centre}) (\textrm{force}).
For example, if a person places a force of 10 N on a spanner (wrench) which is 0.5 m long, the torque will be 5 N m, assuming that the person pulls the spanner by applying force perpendicular to the spanner.
The torque caused by the two opposing forces Fg and −Fg causes a change in the angular momentum L in the direction of that torque. This causes the top to precess.
Static equilibrium
For an object to be in static equilibrium, not only must the sum of the forces be zero, but also the sum of the torques (moments) about any point. For a twodimensional situation with horizontal and vertical forces, the sum of the forces requirement is two equations: ΣH = 0 and ΣV = 0, and the torque a third equation: Στ = 0. That is, to solve statically determinate equilibrium problems in twodimensions, we use three equations.
Net force versus torque
When the net force on the system is zero, the torque measured from any point in space is the same. For example, the torque on a currentcarrying loop in a uniform magnetic field is the same regardless of your point of reference. If the net force \mathbf{F} is not zero, and \mathbf{\tau}_1 is the torque measured from \mathbf{r}_1, then the torque measured from \mathbf{r}_2 is \mathbf{\tau}_2 = \mathbf{\tau}_1 + (\mathbf{r}_1  \mathbf{r}_2) \times \mathbf{F}
Machine torque
Torque curve of a motorcycle ("BMW K 1200 R 2005"). The horizontal axis is the speed (in rpm) that the crankshaft is turning, and the vertical axis is the torque (in Newton metres) that the engine is capable of providing at that speed.
Torque is part of the basic specification of an engine: the power output of an engine is expressed as its torque multiplied by its rotational speed of the axis. Internalcombustion engines produce useful torque only over a limited range of rotational speeds (typically from around 1,000–6,000 rpm for a small car). The varying torque output over that range can be measured with a dynamometer, and shown as a torque curve. The peak of that torque curve occurs somewhat below the overall power peak. The torque peak cannot, by definition, appear at higher rpm than the power peak.
Understanding the relationship between torque, power and engine speed is vital in automotive engineering, concerned as it is with transmitting power from the engine through the drive train to the wheels. Power is a function of torque and engine speed. The gearing of the drive train must be chosen appropriately to make the most of the motor's torque characteristics. Power at the drive wheels is equal to engine power less mechanical losses regardless of any gearing between the engine and drive wheels.
Steam engines and electric motors tend to produce maximum torque close to zero rpm, with the torque diminishing as rotational speed rises (due to increasing friction and other constraints). Reciprocating steam engines can start heavy loads from zero RPM without a clutch.
Relationship between torque, power and energy
If a force is allowed to act through a distance, it is doing mechanical work. Similarly, if torque is allowed to act through a rotational distance, it is doing work. Mathematically, for rotation about a fixed axis through the center of mass,
W = \int_{\theta_1}^{\theta_2} \tau\ \mathrm{d}\theta,
where W is work, τ is torque, and θ1 and θ2 represent (respectively) the initial and final angular positions of the body.[10] It follows from the workenergy theorem that W also represents the change in the rotational kinetic energy Krot of the body, given by
K_{\mathrm{rot}} = \tfrac{1}{2}I\omega^2,
where I is the moment of inertia of the body and ω is its angular speed.[10]
Power is the work per unit time, given by
P = \boldsymbol{\tau} \cdot \boldsymbol{\omega},
where P is power, τ is torque, ω is the angular velocity, and · represents the scalar product.
Mathematically, the equation may be rearranged to compute torque for a given power output. Note that the power injected by the torque depends only on the instantaneous angular speed – not on whether the angular speed increases, decreases, or remains constant while the torque is being applied (this is equivalent to the linear case where the power injected by a force depends only on the instantaneous speed – not on the resulting acceleration, if any).
In practice, this relationship can be observed in power stations which are connected to a large electrical power grid. In such an arrangement, the generator's angular speed is fixed by the grid's frequency, and the power output of the plant is determined by the torque applied to the generator's axis of rotation.
Consistent units must be used. For metric SI units power is watts, torque is newton metres and angular speed is radians per second (not rpm and not revolutions per second).
Also, the unit newton metre is dimensionally equivalent to the joule, which is the unit of energy. However, in the case of torque, the unit is assigned to a vector, whereas for energy, it is assigned to a scalar.
Conversion to other units
A conversion factor may be necessary when using different units of power, torque, or angular speed. For example, if rotational speed (revolutions per time) is used in place of angular speed (radians per time), we multiply by a factor of 2π radians per revolution.
\mbox{power} = \mbox{torque} \times 2 \pi \times \mbox{rotational speed}
Adding units:
\mbox{power (W)} = \mbox{torque (N}\cdot\mbox{m)} \times 2 \pi \times \mbox{rotational speed (rps)}
Dividing on the left by 60 seconds per minute and by 1000 watts per kilowatt gives us the following.
\mbox{power (kW)} = \frac{ \mbox{torque (N}\cdot\mbox{m)} \times 2 \pi \times \mbox{rotational speed (rpm)}} {60000}
where rotational speed is in revolutions per minute (rpm).
Some people (e.g. American automotive engineers) use horsepower (imperial mechanical) for power, footpounds (lbf·ft) for torque and rpm for rotational speed. This results in the formula changing to:
\mbox{power (hp)} = \frac{ \mbox{torque(lbf}\cdot\mbox{ft)} \times 2 \pi \times \mbox{rotational speed (rpm)} }{33000}.
The constant below in, ft·lbf/min, changes with the definition of the horsepower; for example, using metric horsepower, it becomes ~32,550.
Use of other units (e.g. BTU/h for power) would require a different custom conversion factor.
Derivation
For a rotating object, the linear distance covered at the circumference in a radian of rotation is the product of the radius with the angular speed. That is: linear speed = radius × angular speed. By definition, linear distance=linear speed × time=radius × angular speed × time.
By the definition of torque: torque=force × radius. We can rearrange this to determine force=torque ÷ radius. These two values can be substituted into the definition of power:
\mbox{power} = \frac{\mbox{force} \times \mbox{linear distance}}{\mbox{time}}=\frac{\left(\frac{\mbox{torque}}{\displaystyle{r}}\right) \times (r \times \mbox{angular speed} \times t)} {t} = \mbox{torque} \times \mbox{angular speed}.
The radius r and time t have dropped out of the equation. However angular speed must be in radians, by the assumed direct relationship between linear speed and angular speed at the beginning of the derivation. If the rotational speed is measured in revolutions per unit of time, the linear speed and distance are increased proportionately by 2π in the above derivation to give:
\mbox{power}=\mbox{torque} \times 2 \pi \times \mbox{rotational speed}. \,
If torque is in lbf·ft and rotational speed in revolutions per minute, the above equation gives power in ft·lbf/min. The horsepower form of the equation is then derived by applying the conversion factor 33000 ft·lbf/min per horsepower:
\mbox{power} = \mbox{torque } \times\ 2 \pi\ \times \mbox{ rotational speed} \cdot \frac{\mbox{ft}\cdot\mbox{lbf}}{\mbox{min}} \times \frac{\mbox{horsepower}}{33000 \cdot \frac{\mbox{ft }\cdot\mbox{ lbf}}{\mbox{min}} } \approx \frac {\mbox{torque} \times \mbox{RPM}}{5252}
because 5252.113122... = \frac {33000} {2 \pi}. \,
Principle of moments
The Principle of Moments, also known as Varignon's theorem (not to be confused with the geometrical theorem of the same name) states that the sum of torques due to several forces applied to a single point is equal to the torque due to the sum (resultant) of the forces. Mathematically, this follows from:
(\mathbf{r}\times\mathbf{F}_1) + (\mathbf{r}\times\mathbf{F}_2) + \cdots = \mathbf{r}\times(\mathbf{F}_1+\mathbf{F}_2 + \cdots).
Torque multiplier
A torque multiplier is a gear box, which works on the principle of epicyclic gearing. The given load at the input gets multiplied as per the multiplication factor and transmitted to the output, thereby achieving greater load with minimal effort.
sumber wikipediaGuntap...
kalau ikut ni penerangan pening jg tu kepala mo pikir...sinang cerita torque kekuatan tu injin tarik tu badan kereta
Torque, also called moment or moment of force (see the terminology below), is the tendency of a force to rotate an object about an axis,[1] fulcrum, or pivot. Just as a force is a push or a pull, a torque can be thought of as a twist.
Loosely speaking, torque is a measure of the turning force on an object such as a bolt or a flywheel. For example, pushing or pulling the handle of a wrench connected to a nut or bolt produces a torque (turning force) that loosens or tightens the nut or bolt.
The terminology for this concept is not straightforward: In the US, in physics it is usually called "torque" and in mechanical engineering it is called "moment".[2] However outside the US this varies. In the UK for instance, most physicists will use the term "moment". In mechanical engineering, the term "torque" means something different,[3] described below. In this article the word "torque" is always used to mean the same as "moment".
The symbol for torque is typically τ, the Greek letter tau. When it is called moment, it is commonly denoted M.
The magnitude of torque depends on three quantities: the force applied, the length of the lever arm[4] connecting the axis to the point of force application, and the angle between the force vector and the lever arm. In symbols:
\boldsymbol \tau = \mathbf{r}\times \mathbf{F}\,\!
\tau = rF\sin \theta\,\!
where
τ is the torque vector and τ is the magnitude of the torque,
r is the displacement vector (a vector from the point from which torque is measured to the point where force is applied), and r is the length (or magnitude) of the lever arm vector,
F is the force vector, and F is the magnitude of the force,
× denotes the cross product,
θ is the angle between the force vector and the lever arm vector.
The length of the lever arm is particularly important; choosing this length appropriately lies behind the operation of levers, pulleys, gears, and most other simple machines involving a mechanical advantage.
The SI unit for torque is the newton metre (N·m). For more on the units of torque, see below.
Contents
[hide]
1 Terminology
2 History
3 Definition and relation to angular momentum
3.1 Proof of the equivalence of definitions for a fixed instantaneous centre of rotation
4 Units
5 Special cases and other facts
5.1 Moment arm formula
5.2 Static equilibrium
5.3 Net force versus torque
6 Machine torque
7 Relationship between torque, power and energy
7.1 Conversion to other units
7.2 Derivation
8 Principle of moments
9 Torque multiplier
10 See also
11 References
12 External links
Terminology
See also: Couple (mechanics)
In mechanical engineering (unlike physics), the terms "torque" and "moment" are not interchangeable. "Moment" is the general term for the tendency of one or more applied forces to rotate an object about an axis (the concept which in physics is called torque).[3] "Torque" is a special case of this: If the applied force vectors add to zero (i.e., their "resultant" is zero), then the forces are called a "couple" and their moment is called a "torque".[3]
For example, a rotational force down a shaft, such as a turning screwdriver, forms a couple, so the resulting moment is called a "torque". By contrast, a lateral force on a beam produces a moment (called a bending moment), but since the net force is nonzero, this bending moment is not called a "torque".
This article follows physics terminology by calling all moments by the term "torque", whether or not they are associated with a couple.
History
The concept of torque, also called moment or couple, originated with the studies of Archimedes on levers. The rotational analogues of force, mass, and acceleration are torque, moment of inertia, and angular acceleration, respectively.
Definition and relation to angular momentum
A particle is located at position r relative to its axis of rotation. When a force F is applied to the particle, only the perpendicular component F⊥ produces a torque. This torque τ = r × F has magnitude τ = r F⊥ = r F sinθ and is directed outward from the page.
Torque is defined about a point not specifically about axis as mentioned in several books.
A force applied at a right angle to a lever multiplied by its distance from the lever's fulcrum (the length of the lever arm) is its torque. A force of three newtons applied two metres from the fulcrum, for example, exerts the same torque as a force of one newton applied six metres from the fulcrum. The direction of the torque can be determined by using the right hand grip rule: if the fingers of the right hand curl in the direction of rotation and the thumb points along the axis of rotation, then the thumb also points in the direction of the torque.[5]
More generally, the torque on a particle (which has the position r in some reference frame) can be defined as the cross product:
\boldsymbol{\tau} = \mathbf{r} \times \mathbf{F},
where r is the particle's position vector relative to the fulcrum, and F is the force acting on the particle. The magnitude τ of the torque is given by
\tau = rF\sin\theta,\!
where r is the distance from the axis of rotation to the particle, F is the magnitude of the force applied, and θ is the angle between the position and force vectors. Alternatively,
\tau = rF_{\perp},
where F⊥ is the amount of force directed perpendicularly to the position of the particle. Any force directed parallel to the particle's position vector does not produce a torque.[6]
It follows from the properties of the cross product that the torque vector is perpendicular to both the position and force vectors. It points along the axis of rotation, and its direction is determined by the righthand rule.[6]
The unbalanced torque on a body along axis of rotation determines the rate of change of the body's angular momentum,
\boldsymbol{\tau} = \frac{\mathrm{d}\mathbf{L}}{\mathrm{d}t}
where L is the angular momentum vector and t is time. If multiple torques are acting on the body, it is instead the net torque which determines the rate of change of the angular momentum:
\boldsymbol{\tau}_1 + \cdots + \boldsymbol{\tau}_n = \boldsymbol{\tau}_{\mathrm{net}} = \frac{\mathrm{d}\mathbf{L}}{\mathrm{d}t}.
For rotation about a fixed axis,
\mathbf{L} = I\boldsymbol{\omega},
where I is the moment of inertia and ω is the angular velocity. It follows that
\boldsymbol{\tau}_{\mathrm{net}} = \frac{\mathrm{d}\mathbf{L}}{\mathrm{d}t} = \frac{\mathrm{d}(I\boldsymbol{\omega})}{\mathrm{d}t} = I\frac{\mathrm{d}\boldsymbol{\omega}}{\mathrm{d}t} = I\boldsymbol{\alpha},
where α is the angular acceleration of the body, measured in rad·s−2.This equation has limitation that torque equation is to be only written about instantaneous axis of rotation or center of mass for any type of motioneither motion is pure translation,pure rotation or mixed motion.I=Moment of inertia about point about which torque is written(either about instantaneous axis of rotation or center of mass only). If body is in translatory equilibrium then torque equation is same about all points in plane of motion.
Proof of the equivalence of definitions for a fixed instantaneous centre of rotation
The definition of angular momentum for a single particle is:
\mathbf{L} = \mathbf{r} \times \mathbf{p}
where "×" indicates the vector cross product and p is the particle's linear momentum. The timederivative of this is:
\frac{d\mathbf{L}}{dt} = \mathbf{r} \times \frac{d\mathbf{p}}{dt} + \frac{d\mathbf{r}}{dt} \times \mathbf{p}.
This result can easily be proven by splitting the vectors into components and applying the product rule. Now using the definitions of velocity v = dr/dt, acceleration a = dv/dt and linear momentum p = mv (if mass is constant),
\frac{d\mathbf{L}}{dt} = \mathbf{r} \times m \frac{d\mathbf{v}}{dt} + \mathbf{v} \times m\mathbf{v}.
The cross product of any vector with itself is zero, so the second term vanishes. Hence with the definition of force F = ma (Newton's 2nd law),
\frac{d\mathbf{L}}{dt} = \mathbf{r} \times \mathbf{F}.
Then by definition, torque τ = r × F.
If multiple forces are applied, Newton's second law instead reads Fnet = ma, and it follows that
\frac{d\mathbf{L}}{dt} = \mathbf{r} \times \mathbf{F}_{\mathrm{net}} = \boldsymbol{\tau}_{\mathrm{net}}.
The proof relies on the assumption that mass is constant; this is valid only in nonrelativistic systems in which no mass is being ejected.
Units
Torque has dimensions of force times distance. Official SI literature suggests using the unit newton metre (N·m) or the unit joule per radian.[7] The unit newton metre is properly denoted N·m or N m.[8] This avoids ambiguity with mN, millinewtons.
The joule, which is the SI unit for energy or work, is dimensionally equivalent to a newton metre, but it is not used for torque. Energy and torque are entirely different concepts, so the practice of using different unit names for them helps avoid mistakes and misunderstandings.[7] The dimensional equivalence of these units, of course, is not simply a coincidence: A torque of 1 N·m applied through a full revolution will require an energy of exactly 2π joules. Mathematically,
E= \tau \theta\
where E is the energy, τ is magnitude of the torque, and θ is the angle moved (in radians). This equation motivates the alternate unit name joules per radian.[7]
In British unit, "poundforcefeet" (lbf x ft), "footpoundsforce", "inchpoundsforce", "ounceforceinches" (oz x in) are used, and other nonSI units of torque includes "metrekilogramsforce". For all these units, the word "force" is often left out,[9] for example abbreviating "poundforcefoot" to simply "poundfoot" (in this case, it would be implicit that the "pound" is poundforce and not poundmass).
Sometimes one may see torque given units that don't dimensionally make sense. For example: g x cm . In these units, g should be understood as the force given by the weight of 1 gram at the surface of the earth. The surface of the earth is understood to have an average acceleration of gravity (approx. 9.80665 m/sec2).
Special cases and other facts
Moment arm formula
Moment arm diagram
A very useful special case, often given as the definition of torque in fields other than physics, is as follows:
\tau = (\textrm{moment\ arm}) (\textrm{force}).
The construction of the "moment arm" is shown in the figure to the right, along with the vectors r and F mentioned above. The problem with this definition is that it does not give the direction of the torque but only the magnitude, and hence it is difficult to use in threedimensional cases. If the force is perpendicular to the displacement vector r, the moment arm will be equal to the distance to the centre, and torque will be a maximum for the given force. The equation for the magnitude of a torque, arising from a perpendicular force:
\tau = (\textrm{distance\ to\ centre}) (\textrm{force}).
For example, if a person places a force of 10 N on a spanner (wrench) which is 0.5 m long, the torque will be 5 N m, assuming that the person pulls the spanner by applying force perpendicular to the spanner.
The torque caused by the two opposing forces Fg and −Fg causes a change in the angular momentum L in the direction of that torque. This causes the top to precess.
Static equilibrium
For an object to be in static equilibrium, not only must the sum of the forces be zero, but also the sum of the torques (moments) about any point. For a twodimensional situation with horizontal and vertical forces, the sum of the forces requirement is two equations: ΣH = 0 and ΣV = 0, and the torque a third equation: Στ = 0. That is, to solve statically determinate equilibrium problems in twodimensions, we use three equations.
Net force versus torque
When the net force on the system is zero, the torque measured from any point in space is the same. For example, the torque on a currentcarrying loop in a uniform magnetic field is the same regardless of your point of reference. If the net force \mathbf{F} is not zero, and \mathbf{\tau}_1 is the torque measured from \mathbf{r}_1, then the torque measured from \mathbf{r}_2 is \mathbf{\tau}_2 = \mathbf{\tau}_1 + (\mathbf{r}_1  \mathbf{r}_2) \times \mathbf{F}
Machine torque
Torque curve of a motorcycle ("BMW K 1200 R 2005"). The horizontal axis is the speed (in rpm) that the crankshaft is turning, and the vertical axis is the torque (in Newton metres) that the engine is capable of providing at that speed.
Torque is part of the basic specification of an engine: the power output of an engine is expressed as its torque multiplied by its rotational speed of the axis. Internalcombustion engines produce useful torque only over a limited range of rotational speeds (typically from around 1,000–6,000 rpm for a small car). The varying torque output over that range can be measured with a dynamometer, and shown as a torque curve. The peak of that torque curve occurs somewhat below the overall power peak. The torque peak cannot, by definition, appear at higher rpm than the power peak.
Understanding the relationship between torque, power and engine speed is vital in automotive engineering, concerned as it is with transmitting power from the engine through the drive train to the wheels. Power is a function of torque and engine speed. The gearing of the drive train must be chosen appropriately to make the most of the motor's torque characteristics. Power at the drive wheels is equal to engine power less mechanical losses regardless of any gearing between the engine and drive wheels.
Steam engines and electric motors tend to produce maximum torque close to zero rpm, with the torque diminishing as rotational speed rises (due to increasing friction and other constraints). Reciprocating steam engines can start heavy loads from zero RPM without a clutch.
Relationship between torque, power and energy
If a force is allowed to act through a distance, it is doing mechanical work. Similarly, if torque is allowed to act through a rotational distance, it is doing work. Mathematically, for rotation about a fixed axis through the center of mass,
W = \int_{\theta_1}^{\theta_2} \tau\ \mathrm{d}\theta,
where W is work, τ is torque, and θ1 and θ2 represent (respectively) the initial and final angular positions of the body.[10] It follows from the workenergy theorem that W also represents the change in the rotational kinetic energy Krot of the body, given by
K_{\mathrm{rot}} = \tfrac{1}{2}I\omega^2,
where I is the moment of inertia of the body and ω is its angular speed.[10]
Power is the work per unit time, given by
P = \boldsymbol{\tau} \cdot \boldsymbol{\omega},
where P is power, τ is torque, ω is the angular velocity, and · represents the scalar product.
Mathematically, the equation may be rearranged to compute torque for a given power output. Note that the power injected by the torque depends only on the instantaneous angular speed – not on whether the angular speed increases, decreases, or remains constant while the torque is being applied (this is equivalent to the linear case where the power injected by a force depends only on the instantaneous speed – not on the resulting acceleration, if any).
In practice, this relationship can be observed in power stations which are connected to a large electrical power grid. In such an arrangement, the generator's angular speed is fixed by the grid's frequency, and the power output of the plant is determined by the torque applied to the generator's axis of rotation.
Consistent units must be used. For metric SI units power is watts, torque is newton metres and angular speed is radians per second (not rpm and not revolutions per second).
Also, the unit newton metre is dimensionally equivalent to the joule, which is the unit of energy. However, in the case of torque, the unit is assigned to a vector, whereas for energy, it is assigned to a scalar.
Conversion to other units
A conversion factor may be necessary when using different units of power, torque, or angular speed. For example, if rotational speed (revolutions per time) is used in place of angular speed (radians per time), we multiply by a factor of 2π radians per revolution.
\mbox{power} = \mbox{torque} \times 2 \pi \times \mbox{rotational speed}
Adding units:
\mbox{power (W)} = \mbox{torque (N}\cdot\mbox{m)} \times 2 \pi \times \mbox{rotational speed (rps)}
Dividing on the left by 60 seconds per minute and by 1000 watts per kilowatt gives us the following.
\mbox{power (kW)} = \frac{ \mbox{torque (N}\cdot\mbox{m)} \times 2 \pi \times \mbox{rotational speed (rpm)}} {60000}
where rotational speed is in revolutions per minute (rpm).
Some people (e.g. American automotive engineers) use horsepower (imperial mechanical) for power, footpounds (lbf·ft) for torque and rpm for rotational speed. This results in the formula changing to:
\mbox{power (hp)} = \frac{ \mbox{torque(lbf}\cdot\mbox{ft)} \times 2 \pi \times \mbox{rotational speed (rpm)} }{33000}.
The constant below in, ft·lbf/min, changes with the definition of the horsepower; for example, using metric horsepower, it becomes ~32,550.
Use of other units (e.g. BTU/h for power) would require a different custom conversion factor.
Derivation
For a rotating object, the linear distance covered at the circumference in a radian of rotation is the product of the radius with the angular speed. That is: linear speed = radius × angular speed. By definition, linear distance=linear speed × time=radius × angular speed × time.
By the definition of torque: torque=force × radius. We can rearrange this to determine force=torque ÷ radius. These two values can be substituted into the definition of power:
\mbox{power} = \frac{\mbox{force} \times \mbox{linear distance}}{\mbox{time}}=\frac{\left(\frac{\mbox{torque}}{\displaystyle{r}}\right) \times (r \times \mbox{angular speed} \times t)} {t} = \mbox{torque} \times \mbox{angular speed}.
The radius r and time t have dropped out of the equation. However angular speed must be in radians, by the assumed direct relationship between linear speed and angular speed at the beginning of the derivation. If the rotational speed is measured in revolutions per unit of time, the linear speed and distance are increased proportionately by 2π in the above derivation to give;[/spoiler]
Semenjak bnamino cerita pasal seks;liwat,video seks,terkini suara seks(matSabu)smpi negara luar gelar Msia Negara Seks;otak sia kotor oleh ketahian bnamino
http://ranau.bigforum.net/
http://ranau.bigforum.net/

orangaslisabah  SF Leaders
 Posts: 35240
 Joined: Sat Apr 05, 2008 2:30 am
 Credit in hand: 148.12
 Bank: 137,001.46
 Location: KOTA KINABALURANAU
Re: Siapa penyanyi dan title lagu ini "lom pan long lai"?
orangaslisabah wrote:Bukan Andy Lau kah??
[spoiler]Torque, also called moment or moment of force (see the terminology below), is the tendency of a force to rotate an object about an axis,[1] fulcrum, or pivot. Just as a force is a push or a pull, a torque can be thought of as a twist.
Loosely speaking, torque is a measure of the turning force on an object such as a bolt or a flywheel. For example, pushing or pulling the handle of a wrench connected to a nut or bolt produces a torque (turning force) that loosens or tightens the nut or bolt.
The terminology for this concept is not straightforward: In the US, in physics it is usually called "torque" and in mechanical engineering it is called "moment".[2] However outside the US this varies. In the UK for instance, most physicists will use the term "moment". In mechanical engineering, the term "torque" means something different,[3] described below. In this article the word "torque" is always used to mean the same as "moment".
The symbol for torque is typically τ, the Greek letter tau. When it is called moment, it is commonly denoted M.
The magnitude of torque depends on three quantities: the force applied, the length of the lever arm[4] connecting the axis to the point of force application, and the angle between the force vector and the lever arm. In symbols:
\boldsymbol \tau = \mathbf{r}\times \mathbf{F}\,\!
\tau = rF\sin \theta\,\!
where
τ is the torque vector and τ is the magnitude of the torque,
r is the displacement vector (a vector from the point from which torque is measured to the point where force is applied), and r is the length (or magnitude) of the lever arm vector,
F is the force vector, and F is the magnitude of the force,
× denotes the cross product,
θ is the angle between the force vector and the lever arm vector.
The length of the lever arm is particularly important; choosing this length appropriately lies behind the operation of levers, pulleys, gears, and most other simple machines involving a mechanical advantage.
The SI unit for torque is the newton metre (N·m). For more on the units of torque, see below.
Contents
[hide]
1 Terminology
2 History
3 Definition and relation to angular momentum
3.1 Proof of the equivalence of definitions for a fixed instantaneous centre of rotation
4 Units
5 Special cases and other facts
5.1 Moment arm formula
5.2 Static equilibrium
5.3 Net force versus torque
6 Machine torque
7 Relationship between torque, power and energy
7.1 Conversion to other units
7.2 Derivation
8 Principle of moments
9 Torque multiplier
10 See also
11 References
12 External links
Terminology
See also: Couple (mechanics)
In mechanical engineering (unlike physics), the terms "torque" and "moment" are not interchangeable. "Moment" is the general term for the tendency of one or more applied forces to rotate an object about an axis (the concept which in physics is called torque).[3] "Torque" is a special case of this: If the applied force vectors add to zero (i.e., their "resultant" is zero), then the forces are called a "couple" and their moment is called a "torque".[3]
For example, a rotational force down a shaft, such as a turning screwdriver, forms a couple, so the resulting moment is called a "torque". By contrast, a lateral force on a beam produces a moment (called a bending moment), but since the net force is nonzero, this bending moment is not called a "torque".
This article follows physics terminology by calling all moments by the term "torque", whether or not they are associated with a couple.
History
The concept of torque, also called moment or couple, originated with the studies of Archimedes on levers. The rotational analogues of force, mass, and acceleration are torque, moment of inertia, and angular acceleration, respectively.
Definition and relation to angular momentum
A particle is located at position r relative to its axis of rotation. When a force F is applied to the particle, only the perpendicular component F⊥ produces a torque. This torque τ = r × F has magnitude τ = r F⊥ = r F sinθ and is directed outward from the page.
Torque is defined about a point not specifically about axis as mentioned in several books.
A force applied at a right angle to a lever multiplied by its distance from the lever's fulcrum (the length of the lever arm) is its torque. A force of three newtons applied two metres from the fulcrum, for example, exerts the same torque as a force of one newton applied six metres from the fulcrum. The direction of the torque can be determined by using the right hand grip rule: if the fingers of the right hand curl in the direction of rotation and the thumb points along the axis of rotation, then the thumb also points in the direction of the torque.[5]
More generally, the torque on a particle (which has the position r in some reference frame) can be defined as the cross product:
\boldsymbol{\tau} = \mathbf{r} \times \mathbf{F},
where r is the particle's position vector relative to the fulcrum, and F is the force acting on the particle. The magnitude τ of the torque is given by
\tau = rF\sin\theta,\!
where r is the distance from the axis of rotation to the particle, F is the magnitude of the force applied, and θ is the angle between the position and force vectors. Alternatively,
\tau = rF_{\perp},
where F⊥ is the amount of force directed perpendicularly to the position of the particle. Any force directed parallel to the particle's position vector does not produce a torque.[6]
It follows from the properties of the cross product that the torque vector is perpendicular to both the position and force vectors. It points along the axis of rotation, and its direction is determined by the righthand rule.[6]
The unbalanced torque on a body along axis of rotation determines the rate of change of the body's angular momentum,
\boldsymbol{\tau} = \frac{\mathrm{d}\mathbf{L}}{\mathrm{d}t}
where L is the angular momentum vector and t is time. If multiple torques are acting on the body, it is instead the net torque which determines the rate of change of the angular momentum:
\boldsymbol{\tau}_1 + \cdots + \boldsymbol{\tau}_n = \boldsymbol{\tau}_{\mathrm{net}} = \frac{\mathrm{d}\mathbf{L}}{\mathrm{d}t}.
For rotation about a fixed axis,
\mathbf{L} = I\boldsymbol{\omega},
where I is the moment of inertia and ω is the angular velocity. It follows that
\boldsymbol{\tau}_{\mathrm{net}} = \frac{\mathrm{d}\mathbf{L}}{\mathrm{d}t} = \frac{\mathrm{d}(I\boldsymbol{\omega})}{\mathrm{d}t} = I\frac{\mathrm{d}\boldsymbol{\omega}}{\mathrm{d}t} = I\boldsymbol{\alpha},
where α is the angular acceleration of the body, measured in rad·s−2.This equation has limitation that torque equation is to be only written about instantaneous axis of rotation or center of mass for any type of motioneither motion is pure translation,pure rotation or mixed motion.I=Moment of inertia about point about which torque is written(either about instantaneous axis of rotation or center of mass only). If body is in translatory equilibrium then torque equation is same about all points in plane of motion.
Proof of the equivalence of definitions for a fixed instantaneous centre of rotation
The definition of angular momentum for a single particle is:
\mathbf{L} = \mathbf{r} \times \mathbf{p}
where "×" indicates the vector cross product and p is the particle's linear momentum. The timederivative of this is:
\frac{d\mathbf{L}}{dt} = \mathbf{r} \times \frac{d\mathbf{p}}{dt} + \frac{d\mathbf{r}}{dt} \times \mathbf{p}.
This result can easily be proven by splitting the vectors into components and applying the product rule. Now using the definitions of velocity v = dr/dt, acceleration a = dv/dt and linear momentum p = mv (if mass is constant),
\frac{d\mathbf{L}}{dt} = \mathbf{r} \times m \frac{d\mathbf{v}}{dt} + \mathbf{v} \times m\mathbf{v}.
The cross product of any vector with itself is zero, so the second term vanishes. Hence with the definition of force F = ma (Newton's 2nd law),
\frac{d\mathbf{L}}{dt} = \mathbf{r} \times \mathbf{F}.
Then by definition, torque τ = r × F.
If multiple forces are applied, Newton's second law instead reads Fnet = ma, and it follows that
\frac{d\mathbf{L}}{dt} = \mathbf{r} \times \mathbf{F}_{\mathrm{net}} = \boldsymbol{\tau}_{\mathrm{net}}.
The proof relies on the assumption that mass is constant; this is valid only in nonrelativistic systems in which no mass is being ejected.
Units
Torque has dimensions of force times distance. Official SI literature suggests using the unit newton metre (N·m) or the unit joule per radian.[7] The unit newton metre is properly denoted N·m or N m.[8] This avoids ambiguity with mN, millinewtons.
The joule, which is the SI unit for energy or work, is dimensionally equivalent to a newton metre, but it is not used for torque. Energy and torque are entirely different concepts, so the practice of using different unit names for them helps avoid mistakes and misunderstandings.[7] The dimensional equivalence of these units, of course, is not simply a coincidence: A torque of 1 N·m applied through a full revolution will require an energy of exactly 2π joules. Mathematically,
E= \tau \theta\
where E is the energy, τ is magnitude of the torque, and θ is the angle moved (in radians). This equation motivates the alternate unit name joules per radian.[7]
In British unit, "poundforcefeet" (lbf x ft), "footpoundsforce", "inchpoundsforce", "ounceforceinches" (oz x in) are used, and other nonSI units of torque includes "metrekilogramsforce". For all these units, the word "force" is often left out,[9] for example abbreviating "poundforcefoot" to simply "poundfoot" (in this case, it would be implicit that the "pound" is poundforce and not poundmass).
Sometimes one may see torque given units that don't dimensionally make sense. For example: g x cm . In these units, g should be understood as the force given by the weight of 1 gram at the surface of the earth. The surface of the earth is understood to have an average acceleration of gravity (approx. 9.80665 m/sec2).
Special cases and other facts
Moment arm formula
Moment arm diagram
A very useful special case, often given as the definition of torque in fields other than physics, is as follows:
\tau = (\textrm{moment\ arm}) (\textrm{force}).
The construction of the "moment arm" is shown in the figure to the right, along with the vectors r and F mentioned above. The problem with this definition is that it does not give the direction of the torque but only the magnitude, and hence it is difficult to use in threedimensional cases. If the force is perpendicular to the displacement vector r, the moment arm will be equal to the distance to the centre, and torque will be a maximum for the given force. The equation for the magnitude of a torque, arising from a perpendicular force:
\tau = (\textrm{distance\ to\ centre}) (\textrm{force}).
For example, if a person places a force of 10 N on a spanner (wrench) which is 0.5 m long, the torque will be 5 N m, assuming that the person pulls the spanner by applying force perpendicular to the spanner.
The torque caused by the two opposing forces Fg and −Fg causes a change in the angular momentum L in the direction of that torque. This causes the top to precess.
Static equilibrium
For an object to be in static equilibrium, not only must the sum of the forces be zero, but also the sum of the torques (moments) about any point. For a twodimensional situation with horizontal and vertical forces, the sum of the forces requirement is two equations: ΣH = 0 and ΣV = 0, and the torque a third equation: Στ = 0. That is, to solve statically determinate equilibrium problems in twodimensions, we use three equations.
Net force versus torque
When the net force on the system is zero, the torque measured from any point in space is the same. For example, the torque on a currentcarrying loop in a uniform magnetic field is the same regardless of your point of reference. If the net force \mathbf{F} is not zero, and \mathbf{\tau}_1 is the torque measured from \mathbf{r}_1, then the torque measured from \mathbf{r}_2 is \mathbf{\tau}_2 = \mathbf{\tau}_1 + (\mathbf{r}_1  \mathbf{r}_2) \times \mathbf{F}
Machine torque
Torque curve of a motorcycle ("BMW K 1200 R 2005"). The horizontal axis is the speed (in rpm) that the crankshaft is turning, and the vertical axis is the torque (in Newton metres) that the engine is capable of providing at that speed.
Torque is part of the basic specification of an engine: the power output of an engine is expressed as its torque multiplied by its rotational speed of the axis. Internalcombustion engines produce useful torque only over a limited range of rotational speeds (typically from around 1,000–6,000 rpm for a small car). The varying torque output over that range can be measured with a dynamometer, and shown as a torque curve. The peak of that torque curve occurs somewhat below the overall power peak. The torque peak cannot, by definition, appear at higher rpm than the power peak.
Understanding the relationship between torque, power and engine speed is vital in automotive engineering, concerned as it is with transmitting power from the engine through the drive train to the wheels. Power is a function of torque and engine speed. The gearing of the drive train must be chosen appropriately to make the most of the motor's torque characteristics. Power at the drive wheels is equal to engine power less mechanical losses regardless of any gearing between the engine and drive wheels.
Steam engines and electric motors tend to produce maximum torque close to zero rpm, with the torque diminishing as rotational speed rises (due to increasing friction and other constraints). Reciprocating steam engines can start heavy loads from zero RPM without a clutch.
Relationship between torque, power and energy
If a force is allowed to act through a distance, it is doing mechanical work. Similarly, if torque is allowed to act through a rotational distance, it is doing work. Mathematically, for rotation about a fixed axis through the center of mass,
W = \int_{\theta_1}^{\theta_2} \tau\ \mathrm{d}\theta,
where W is work, τ is torque, and θ1 and θ2 represent (respectively) the initial and final angular positions of the body.[10] It follows from the workenergy theorem that W also represents the change in the rotational kinetic energy Krot of the body, given by
K_{\mathrm{rot}} = \tfrac{1}{2}I\omega^2,
where I is the moment of inertia of the body and ω is its angular speed.[10]
Power is the work per unit time, given by
P = \boldsymbol{\tau} \cdot \boldsymbol{\omega},
where P is power, τ is torque, ω is the angular velocity, and · represents the scalar product.
Mathematically, the equation may be rearranged to compute torque for a given power output. Note that the power injected by the torque depends only on the instantaneous angular speed – not on whether the angular speed increases, decreases, or remains constant while the torque is being applied (this is equivalent to the linear case where the power injected by a force depends only on the instantaneous speed – not on the resulting acceleration, if any).
In practice, this relationship can be observed in power stations which are connected to a large electrical power grid. In such an arrangement, the generator's angular speed is fixed by the grid's frequency, and the power output of the plant is determined by the torque applied to the generator's axis of rotation.
Consistent units must be used. For metric SI units power is watts, torque is newton metres and angular speed is radians per second (not rpm and not revolutions per second).
Also, the unit newton metre is dimensionally equivalent to the joule, which is the unit of energy. However, in the case of torque, the unit is assigned to a vector, whereas for energy, it is assigned to a scalar.
Conversion to other units
A conversion factor may be necessary when using different units of power, torque, or angular speed. For example, if rotational speed (revolutions per time) is used in place of angular speed (radians per time), we multiply by a factor of 2π radians per revolution.
\mbox{power} = \mbox{torque} \times 2 \pi \times \mbox{rotational speed}
Adding units:
\mbox{power (W)} = \mbox{torque (N}\cdot\mbox{m)} \times 2 \pi \times \mbox{rotational speed (rps)}
Dividing on the left by 60 seconds per minute and by 1000 watts per kilowatt gives us the following.
\mbox{power (kW)} = \frac{ \mbox{torque (N}\cdot\mbox{m)} \times 2 \pi \times \mbox{rotational speed (rpm)}} {60000}
where rotational speed is in revolutions per minute (rpm).
Some people (e.g. American automotive engineers) use horsepower (imperial mechanical) for power, footpounds (lbf·ft) for torque and rpm for rotational speed. This results in the formula changing to:
\mbox{power (hp)} = \frac{ \mbox{torque(lbf}\cdot\mbox{ft)} \times 2 \pi \times \mbox{rotational speed (rpm)} }{33000}.
The constant below in, ft·lbf/min, changes with the definition of the horsepower; for example, using metric horsepower, it becomes ~32,550.
Use of other units (e.g. BTU/h for power) would require a different custom conversion factor.
Derivation
For a rotating object, the linear distance covered at the circumference in a radian of rotation is the product of the radius with the angular speed. That is: linear speed = radius × angular speed. By definition, linear distance=linear speed × time=radius × angular speed × time.
By the definition of torque: torque=force × radius. We can rearrange this to determine force=torque ÷ radius. These two values can be substituted into the definition of power:
\mbox{power} = \frac{\mbox{force} \times \mbox{linear distance}}{\mbox{time}}=\frac{\left(\frac{\mbox{torque}}{\displaystyle{r}}\right) \times (r \times \mbox{angular speed} \times t)} {t} = \mbox{torque} \times \mbox{angular speed}.
The radius r and time t have dropped out of the equation. However angular speed must be in radians, by the assumed direct relationship between linear speed and angular speed at the beginning of the derivation. If the rotational speed is measured in revolutions per unit of time, the linear speed and distance are increased proportionately by 2π in the above derivation to give:
\mbox{power}=\mbox{torque} \times 2 \pi \times \mbox{rotational speed}. \,
If torque is in lbf·ft and rotational speed in revolutions per minute, the above equation gives power in ft·lbf/min. The horsepower form of the equation is then derived by applying the conversion factor 33000 ft·lbf/min per horsepower:
\mbox{power} = \mbox{torque } \times\ 2 \pi\ \times \mbox{ rotational speed} \cdot \frac{\mbox{ft}\cdot\mbox{lbf}}{\mbox{min}} \times \frac{\mbox{horsepower}}{33000 \cdot \frac{\mbox{ft }\cdot\mbox{ lbf}}{\mbox{min}} } \approx \frac {\mbox{torque} \times \mbox{RPM}}{5252}
because 5252.113122... = \frac {33000} {2 \pi}. \,
Principle of moments
The Principle of Moments, also known as Varignon's theorem (not to be confused with the geometrical theorem of the same name) states that the sum of torques due to several forces applied to a single point is equal to the torque due to the sum (resultant) of the forces. Mathematically, this follows from:
(\mathbf{r}\times\mathbf{F}_1) + (\mathbf{r}\times\mathbf{F}_2) + \cdots = \mathbf{r}\times(\mathbf{F}_1+\mathbf{F}_2 + \cdots).
Torque multiplier
A torque multiplier is a gear box, which works on the principle of epicyclic gearing. The given load at the input gets multiplied as per the multiplication factor and transmitted to the output, thereby achieving greater load with minimal effort.
sumber wikipediaGuntap...
kalau ikut ni penerangan pening jg tu kepala mo pikir...sinang cerita torque kekuatan tu injin tarik tu badan kereta
Torque, also called moment or moment of force (see the terminology below), is the tendency of a force to rotate an object about an axis,[1] fulcrum, or pivot. Just as a force is a push or a pull, a torque can be thought of as a twist.
Loosely speaking, torque is a measure of the turning force on an object such as a bolt or a flywheel. For example, pushing or pulling the handle of a wrench connected to a nut or bolt produces a torque (turning force) that loosens or tightens the nut or bolt.
The terminology for this concept is not straightforward: In the US, in physics it is usually called "torque" and in mechanical engineering it is called "moment".[2] However outside the US this varies. In the UK for instance, most physicists will use the term "moment". In mechanical engineering, the term "torque" means something different,[3] described below. In this article the word "torque" is always used to mean the same as "moment".
The symbol for torque is typically τ, the Greek letter tau. When it is called moment, it is commonly denoted M.
The magnitude of torque depends on three quantities: the force applied, the length of the lever arm[4] connecting the axis to the point of force application, and the angle between the force vector and the lever arm. In symbols:
\boldsymbol \tau = \mathbf{r}\times \mathbf{F}\,\!
\tau = rF\sin \theta\,\!
where
τ is the torque vector and τ is the magnitude of the torque,
r is the displacement vector (a vector from the point from which torque is measured to the point where force is applied), and r is the length (or magnitude) of the lever arm vector,
F is the force vector, and F is the magnitude of the force,
× denotes the cross product,
θ is the angle between the force vector and the lever arm vector.
The length of the lever arm is particularly important; choosing this length appropriately lies behind the operation of levers, pulleys, gears, and most other simple machines involving a mechanical advantage.
The SI unit for torque is the newton metre (N·m). For more on the units of torque, see below.
Contents
[hide]
1 Terminology
2 History
3 Definition and relation to angular momentum
3.1 Proof of the equivalence of definitions for a fixed instantaneous centre of rotation
4 Units
5 Special cases and other facts
5.1 Moment arm formula
5.2 Static equilibrium
5.3 Net force versus torque
6 Machine torque
7 Relationship between torque, power and energy
7.1 Conversion to other units
7.2 Derivation
8 Principle of moments
9 Torque multiplier
10 See also
11 References
12 External links
Terminology
See also: Couple (mechanics)
In mechanical engineering (unlike physics), the terms "torque" and "moment" are not interchangeable. "Moment" is the general term for the tendency of one or more applied forces to rotate an object about an axis (the concept which in physics is called torque).[3] "Torque" is a special case of this: If the applied force vectors add to zero (i.e., their "resultant" is zero), then the forces are called a "couple" and their moment is called a "torque".[3]
For example, a rotational force down a shaft, such as a turning screwdriver, forms a couple, so the resulting moment is called a "torque". By contrast, a lateral force on a beam produces a moment (called a bending moment), but since the net force is nonzero, this bending moment is not called a "torque".
This article follows physics terminology by calling all moments by the term "torque", whether or not they are associated with a couple.
History
The concept of torque, also called moment or couple, originated with the studies of Archimedes on levers. The rotational analogues of force, mass, and acceleration are torque, moment of inertia, and angular acceleration, respectively.
Definition and relation to angular momentum
A particle is located at position r relative to its axis of rotation. When a force F is applied to the particle, only the perpendicular component F⊥ produces a torque. This torque τ = r × F has magnitude τ = r F⊥ = r F sinθ and is directed outward from the page.
Torque is defined about a point not specifically about axis as mentioned in several books.
A force applied at a right angle to a lever multiplied by its distance from the lever's fulcrum (the length of the lever arm) is its torque. A force of three newtons applied two metres from the fulcrum, for example, exerts the same torque as a force of one newton applied six metres from the fulcrum. The direction of the torque can be determined by using the right hand grip rule: if the fingers of the right hand curl in the direction of rotation and the thumb points along the axis of rotation, then the thumb also points in the direction of the torque.[5]
More generally, the torque on a particle (which has the position r in some reference frame) can be defined as the cross product:
\boldsymbol{\tau} = \mathbf{r} \times \mathbf{F},
where r is the particle's position vector relative to the fulcrum, and F is the force acting on the particle. The magnitude τ of the torque is given by
\tau = rF\sin\theta,\!
where r is the distance from the axis of rotation to the particle, F is the magnitude of the force applied, and θ is the angle between the position and force vectors. Alternatively,
\tau = rF_{\perp},
where F⊥ is the amount of force directed perpendicularly to the position of the particle. Any force directed parallel to the particle's position vector does not produce a torque.[6]
It follows from the properties of the cross product that the torque vector is perpendicular to both the position and force vectors. It points along the axis of rotation, and its direction is determined by the righthand rule.[6]
The unbalanced torque on a body along axis of rotation determines the rate of change of the body's angular momentum,
\boldsymbol{\tau} = \frac{\mathrm{d}\mathbf{L}}{\mathrm{d}t}
where L is the angular momentum vector and t is time. If multiple torques are acting on the body, it is instead the net torque which determines the rate of change of the angular momentum:
\boldsymbol{\tau}_1 + \cdots + \boldsymbol{\tau}_n = \boldsymbol{\tau}_{\mathrm{net}} = \frac{\mathrm{d}\mathbf{L}}{\mathrm{d}t}.
For rotation about a fixed axis,
\mathbf{L} = I\boldsymbol{\omega},
where I is the moment of inertia and ω is the angular velocity. It follows that
\boldsymbol{\tau}_{\mathrm{net}} = \frac{\mathrm{d}\mathbf{L}}{\mathrm{d}t} = \frac{\mathrm{d}(I\boldsymbol{\omega})}{\mathrm{d}t} = I\frac{\mathrm{d}\boldsymbol{\omega}}{\mathrm{d}t} = I\boldsymbol{\alpha},
where α is the angular acceleration of the body, measured in rad·s−2.This equation has limitation that torque equation is to be only written about instantaneous axis of rotation or center of mass for any type of motioneither motion is pure translation,pure rotation or mixed motion.I=Moment of inertia about point about which torque is written(either about instantaneous axis of rotation or center of mass only). If body is in translatory equilibrium then torque equation is same about all points in plane of motion.
Proof of the equivalence of definitions for a fixed instantaneous centre of rotation
The definition of angular momentum for a single particle is:
\mathbf{L} = \mathbf{r} \times \mathbf{p}
where "×" indicates the vector cross product and p is the particle's linear momentum. The timederivative of this is:
\frac{d\mathbf{L}}{dt} = \mathbf{r} \times \frac{d\mathbf{p}}{dt} + \frac{d\mathbf{r}}{dt} \times \mathbf{p}.
This result can easily be proven by splitting the vectors into components and applying the product rule. Now using the definitions of velocity v = dr/dt, acceleration a = dv/dt and linear momentum p = mv (if mass is constant),
\frac{d\mathbf{L}}{dt} = \mathbf{r} \times m \frac{d\mathbf{v}}{dt} + \mathbf{v} \times m\mathbf{v}.
The cross product of any vector with itself is zero, so the second term vanishes. Hence with the definition of force F = ma (Newton's 2nd law),
\frac{d\mathbf{L}}{dt} = \mathbf{r} \times \mathbf{F}.
Then by definition, torque τ = r × F.
If multiple forces are applied, Newton's second law instead reads Fnet = ma, and it follows that
\frac{d\mathbf{L}}{dt} = \mathbf{r} \times \mathbf{F}_{\mathrm{net}} = \boldsymbol{\tau}_{\mathrm{net}}.
The proof relies on the assumption that mass is constant; this is valid only in nonrelativistic systems in which no mass is being ejected.
Units
Torque has dimensions of force times distance. Official SI literature suggests using the unit newton metre (N·m) or the unit joule per radian.[7] The unit newton metre is properly denoted N·m or N m.[8] This avoids ambiguity with mN, millinewtons.
The joule, which is the SI unit for energy or work, is dimensionally equivalent to a newton metre, but it is not used for torque. Energy and torque are entirely different concepts, so the practice of using different unit names for them helps avoid mistakes and misunderstandings.[7] The dimensional equivalence of these units, of course, is not simply a coincidence: A torque of 1 N·m applied through a full revolution will require an energy of exactly 2π joules. Mathematically,
E= \tau \theta\
where E is the energy, τ is magnitude of the torque, and θ is the angle moved (in radians). This equation motivates the alternate unit name joules per radian.[7]
In British unit, "poundforcefeet" (lbf x ft), "footpoundsforce", "inchpoundsforce", "ounceforceinches" (oz x in) are used, and other nonSI units of torque includes "metrekilogramsforce". For all these units, the word "force" is often left out,[9] for example abbreviating "poundforcefoot" to simply "poundfoot" (in this case, it would be implicit that the "pound" is poundforce and not poundmass).
Sometimes one may see torque given units that don't dimensionally make sense. For example: g x cm . In these units, g should be understood as the force given by the weight of 1 gram at the surface of the earth. The surface of the earth is understood to have an average acceleration of gravity (approx. 9.80665 m/sec2).
Special cases and other facts
Moment arm formula
Moment arm diagram
A very useful special case, often given as the definition of torque in fields other than physics, is as follows:
\tau = (\textrm{moment\ arm}) (\textrm{force}).
The construction of the "moment arm" is shown in the figure to the right, along with the vectors r and F mentioned above. The problem with this definition is that it does not give the direction of the torque but only the magnitude, and hence it is difficult to use in threedimensional cases. If the force is perpendicular to the displacement vector r, the moment arm will be equal to the distance to the centre, and torque will be a maximum for the given force. The equation for the magnitude of a torque, arising from a perpendicular force:
\tau = (\textrm{distance\ to\ centre}) (\textrm{force}).
For example, if a person places a force of 10 N on a spanner (wrench) which is 0.5 m long, the torque will be 5 N m, assuming that the person pulls the spanner by applying force perpendicular to the spanner.
The torque caused by the two opposing forces Fg and −Fg causes a change in the angular momentum L in the direction of that torque. This causes the top to precess.
Static equilibrium
For an object to be in static equilibrium, not only must the sum of the forces be zero, but also the sum of the torques (moments) about any point. For a twodimensional situation with horizontal and vertical forces, the sum of the forces requirement is two equations: ΣH = 0 and ΣV = 0, and the torque a third equation: Στ = 0. That is, to solve statically determinate equilibrium problems in twodimensions, we use three equations.
Net force versus torque
When the net force on the system is zero, the torque measured from any point in space is the same. For example, the torque on a currentcarrying loop in a uniform magnetic field is the same regardless of your point of reference. If the net force \mathbf{F} is not zero, and \mathbf{\tau}_1 is the torque measured from \mathbf{r}_1, then the torque measured from \mathbf{r}_2 is \mathbf{\tau}_2 = \mathbf{\tau}_1 + (\mathbf{r}_1  \mathbf{r}_2) \times \mathbf{F}
Machine torque
Torque curve of a motorcycle ("BMW K 1200 R 2005"). The horizontal axis is the speed (in rpm) that the crankshaft is turning, and the vertical axis is the torque (in Newton metres) that the engine is capable of providing at that speed.
Torque is part of the basic specification of an engine: the power output of an engine is expressed as its torque multiplied by its rotational speed of the axis. Internalcombustion engines produce useful torque only over a limited range of rotational speeds (typically from around 1,000–6,000 rpm for a small car). The varying torque output over that range can be measured with a dynamometer, and shown as a torque curve. The peak of that torque curve occurs somewhat below the overall power peak. The torque peak cannot, by definition, appear at higher rpm than the power peak.
Understanding the relationship between torque, power and engine speed is vital in automotive engineering, concerned as it is with transmitting power from the engine through the drive train to the wheels. Power is a function of torque and engine speed. The gearing of the drive train must be chosen appropriately to make the most of the motor's torque characteristics. Power at the drive wheels is equal to engine power less mechanical losses regardless of any gearing between the engine and drive wheels.
Steam engines and electric motors tend to produce maximum torque close to zero rpm, with the torque diminishing as rotational speed rises (due to increasing friction and other constraints). Reciprocating steam engines can start heavy loads from zero RPM without a clutch.
Relationship between torque, power and energy
If a force is allowed to act through a distance, it is doing mechanical work. Similarly, if torque is allowed to act through a rotational distance, it is doing work. Mathematically, for rotation about a fixed axis through the center of mass,
W = \int_{\theta_1}^{\theta_2} \tau\ \mathrm{d}\theta,
where W is work, τ is torque, and θ1 and θ2 represent (respectively) the initial and final angular positions of the body.[10] It follows from the workenergy theorem that W also represents the change in the rotational kinetic energy Krot of the body, given by
K_{\mathrm{rot}} = \tfrac{1}{2}I\omega^2,
where I is the moment of inertia of the body and ω is its angular speed.[10]
Power is the work per unit time, given by
P = \boldsymbol{\tau} \cdot \boldsymbol{\omega},
where P is power, τ is torque, ω is the angular velocity, and · represents the scalar product.
Mathematically, the equation may be rearranged to compute torque for a given power output. Note that the power injected by the torque depends only on the instantaneous angular speed – not on whether the angular speed increases, decreases, or remains constant while the torque is being applied (this is equivalent to the linear case where the power injected by a force depends only on the instantaneous speed – not on the resulting acceleration, if any).
In practice, this relationship can be observed in power stations which are connected to a large electrical power grid. In such an arrangement, the generator's angular speed is fixed by the grid's frequency, and the power output of the plant is determined by the torque applied to the generator's axis of rotation.
Consistent units must be used. For metric SI units power is watts, torque is newton metres and angular speed is radians per second (not rpm and not revolutions per second).
Also, the unit newton metre is dimensionally equivalent to the joule, which is the unit of energy. However, in the case of torque, the unit is assigned to a vector, whereas for energy, it is assigned to a scalar.
Conversion to other units
A conversion factor may be necessary when using different units of power, torque, or angular speed. For example, if rotational speed (revolutions per time) is used in place of angular speed (radians per time), we multiply by a factor of 2π radians per revolution.
\mbox{power} = \mbox{torque} \times 2 \pi \times \mbox{rotational speed}
Adding units:
\mbox{power (W)} = \mbox{torque (N}\cdot\mbox{m)} \times 2 \pi \times \mbox{rotational speed (rps)}
Dividing on the left by 60 seconds per minute and by 1000 watts per kilowatt gives us the following.
\mbox{power (kW)} = \frac{ \mbox{torque (N}\cdot\mbox{m)} \times 2 \pi \times \mbox{rotational speed (rpm)}} {60000}
where rotational speed is in revolutions per minute (rpm).
Some people (e.g. American automotive engineers) use horsepower (imperial mechanical) for power, footpounds (lbf·ft) for torque and rpm for rotational speed. This results in the formula changing to:
\mbox{power (hp)} = \frac{ \mbox{torque(lbf}\cdot\mbox{ft)} \times 2 \pi \times \mbox{rotational speed (rpm)} }{33000}.
The constant below in, ft·lbf/min, changes with the definition of the horsepower; for example, using metric horsepower, it becomes ~32,550.
Use of other units (e.g. BTU/h for power) would require a different custom conversion factor.
Derivation
For a rotating object, the linear distance covered at the circumference in a radian of rotation is the product of the radius with the angular speed. That is: linear speed = radius × angular speed. By definition, linear distance=linear speed × time=radius × angular speed × time.
By the definition of torque: torque=force × radius. We can rearrange this to determine force=torque ÷ radius. These two values can be substituted into the definition of power:
\mbox{power} = \frac{\mbox{force} \times \mbox{linear distance}}{\mbox{time}}=\frac{\left(\frac{\mbox{torque}}{\displaystyle{r}}\right) \times (r \times \mbox{angular speed} \times t)} {t} = \mbox{torque} \times \mbox{angular speed}.
The radius r and time t have dropped out of the equation. However angular speed must be in radians, by the assumed direct relationship between linear speed and angular speed at the beginning of the derivation. If the rotational speed is measured in revolutions per unit of time, the linear speed and distance are increased proportionately by 2π in the above derivation to give:
\mbox{power}=\mbox{torque} \times 2 \pi \times \mbox{rotational speed}. \,
If torque is in lbf·ft and rotational speed in revolutions per minute, the above equation gives power in ft·lbf/min. The horsepower form of the equation is then derived by applying the conversion factor 33000 ft·lbf/min per horsepower:
\mbox{power} = \mbox{torque } \times\ 2 \pi\ \times \mbox{ rotational speed} \cdot \frac{\mbox{ft}\cdot\mbox{lbf}}{\mbox{min}} \times \frac{\mbox{horsepower}}{33000 \cdot \frac{\mbox{ft }\cdot\mbox{ lbf}}{\mbox{min}} } \approx \frac {\mbox{torque} \times \mbox{RPM}}{5252}
because 5252.113122... = \frac {33000} {2 \pi}. \,
Principle of moments
The Principle of Moments, also known as Varignon's theorem (not to be confused with the geometrical theorem of the same name) states that the sum of torques due to several forces applied to a single point is equal to the torque due to the sum (resultant) of the forces. Mathematically, this follows from:
(\mathbf{r}\times\mathbf{F}_1) + (\mathbf{r}\times\mathbf{F}_2) + \cdots = \mathbf{r}\times(\mathbf{F}_1+\mathbf{F}_2 + \cdots).
Torque multiplier
A torque multiplier is a gear box, which works on the principle of epicyclic gearing. The given load at the input gets multiplied as per the multiplication factor and transmitted to the output, thereby achieving greater load with minimal effort.
sumber wikipediaGuntap...
kalau ikut ni penerangan pening jg tu kepala mo pikir...sinang cerita torque kekuatan tu injin tarik tu badan kereta
Torque, also called moment or moment of force (see the terminology below), is the tendency of a force to rotate an object about an axis,[1] fulcrum, or pivot. Just as a force is a push or a pull, a torque can be thought of as a twist.
Loosely speaking, torque is a measure of the turning force on an object such as a bolt or a flywheel. For example, pushing or pulling the handle of a wrench connected to a nut or bolt produces a torque (turning force) that loosens or tightens the nut or bolt.
The terminology for this concept is not straightforward: In the US, in physics it is usually called "torque" and in mechanical engineering it is called "moment".[2] However outside the US this varies. In the UK for instance, most physicists will use the term "moment". In mechanical engineering, the term "torque" means something different,[3] described below. In this article the word "torque" is always used to mean the same as "moment".
The symbol for torque is typically τ, the Greek letter tau. When it is called moment, it is commonly denoted M.
The magnitude of torque depends on three quantities: the force applied, the length of the lever arm[4] connecting the axis to the point of force application, and the angle between the force vector and the lever arm. In symbols:
\boldsymbol \tau = \mathbf{r}\times \mathbf{F}\,\!
\tau = rF\sin \theta\,\!
where
τ is the torque vector and τ is the magnitude of the torque,
r is the displacement vector (a vector from the point from which torque is measured to the point where force is applied), and r is the length (or magnitude) of the lever arm vector,
F is the force vector, and F is the magnitude of the force,
× denotes the cross product,
θ is the angle between the force vector and the lever arm vector.
The length of the lever arm is particularly important; choosing this length appropriately lies behind the operation of levers, pulleys, gears, and most other simple machines involving a mechanical advantage.
The SI unit for torque is the newton metre (N·m). For more on the units of torque, see below.
Contents
[hide]
1 Terminology
2 History
3 Definition and relation to angular momentum
3.1 Proof of the equivalence of definitions for a fixed instantaneous centre of rotation
4 Units
5 Special cases and other facts
5.1 Moment arm formula
5.2 Static equilibrium
5.3 Net force versus torque
6 Machine torque
7 Relationship between torque, power and energy
7.1 Conversion to other units
7.2 Derivation
8 Principle of moments
9 Torque multiplier
10 See also
11 References
12 External links
Terminology
See also: Couple (mechanics)
In mechanical engineering (unlike physics), the terms "torque" and "moment" are not interchangeable. "Moment" is the general term for the tendency of one or more applied forces to rotate an object about an axis (the concept which in physics is called torque).[3] "Torque" is a special case of this: If the applied force vectors add to zero (i.e., their "resultant" is zero), then the forces are called a "couple" and their moment is called a "torque".[3]
For example, a rotational force down a shaft, such as a turning screwdriver, forms a couple, so the resulting moment is called a "torque". By contrast, a lateral force on a beam produces a moment (called a bending moment), but since the net force is nonzero, this bending moment is not called a "torque".
This article follows physics terminology by calling all moments by the term "torque", whether or not they are associated with a couple.
History
The concept of torque, also called moment or couple, originated with the studies of Archimedes on levers. The rotational analogues of force, mass, and acceleration are torque, moment of inertia, and angular acceleration, respectively.
Definition and relation to angular momentum
A particle is located at position r relative to its axis of rotation. When a force F is applied to the particle, only the perpendicular component F⊥ produces a torque. This torque τ = r × F has magnitude τ = r F⊥ = r F sinθ and is directed outward from the page.
Torque is defined about a point not specifically about axis as mentioned in several books.
A force applied at a right angle to a lever multiplied by its distance from the lever's fulcrum (the length of the lever arm) is its torque. A force of three newtons applied two metres from the fulcrum, for example, exerts the same torque as a force of one newton applied six metres from the fulcrum. The direction of the torque can be determined by using the right hand grip rule: if the fingers of the right hand curl in the direction of rotation and the thumb points along the axis of rotation, then the thumb also points in the direction of the torque.[5]
More generally, the torque on a particle (which has the position r in some reference frame) can be defined as the cross product:
\boldsymbol{\tau} = \mathbf{r} \times \mathbf{F},
where r is the particle's position vector relative to the fulcrum, and F is the force acting on the particle. The magnitude τ of the torque is given by
\tau = rF\sin\theta,\!
where r is the distance from the axis of rotation to the particle, F is the magnitude of the force applied, and θ is the angle between the position and force vectors. Alternatively,
\tau = rF_{\perp},
where F⊥ is the amount of force directed perpendicularly to the position of the particle. Any force directed parallel to the particle's position vector does not produce a torque.[6]
It follows from the properties of the cross product that the torque vector is perpendicular to both the position and force vectors. It points along the axis of rotation, and its direction is determined by the righthand rule.[6]
The unbalanced torque on a body along axis of rotation determines the rate of change of the body's angular momentum,
\boldsymbol{\tau} = \frac{\mathrm{d}\mathbf{L}}{\mathrm{d}t}
where L is the angular momentum vector and t is time. If multiple torques are acting on the body, it is instead the net torque which determines the rate of change of the angular momentum:
\boldsymbol{\tau}_1 + \cdots + \boldsymbol{\tau}_n = \boldsymbol{\tau}_{\mathrm{net}} = \frac{\mathrm{d}\mathbf{L}}{\mathrm{d}t}.
For rotation about a fixed axis,
\mathbf{L} = I\boldsymbol{\omega},
where I is the moment of inertia and ω is the angular velocity. It follows that
\boldsymbol{\tau}_{\mathrm{net}} = \frac{\mathrm{d}\mathbf{L}}{\mathrm{d}t} = \frac{\mathrm{d}(I\boldsymbol{\omega})}{\mathrm{d}t} = I\frac{\mathrm{d}\boldsymbol{\omega}}{\mathrm{d}t} = I\boldsymbol{\alpha},
where α is the angular acceleration of the body, measured in rad·s−2.This equation has limitation that torque equation is to be only written about instantaneous axis of rotation or center of mass for any type of motioneither motion is pure translation,pure rotation or mixed motion.I=Moment of inertia about point about which torque is written(either about instantaneous axis of rotation or center of mass only). If body is in translatory equilibrium then torque equation is same about all points in plane of motion.
Proof of the equivalence of definitions for a fixed instantaneous centre of rotation
The definition of angular momentum for a single particle is:
\mathbf{L} = \mathbf{r} \times \mathbf{p}
where "×" indicates the vector cross product and p is the particle's linear momentum. The timederivative of this is:
\frac{d\mathbf{L}}{dt} = \mathbf{r} \times \frac{d\mathbf{p}}{dt} + \frac{d\mathbf{r}}{dt} \times \mathbf{p}.
This result can easily be proven by splitting the vectors into components and applying the product rule. Now using the definitions of velocity v = dr/dt, acceleration a = dv/dt and linear momentum p = mv (if mass is constant),
\frac{d\mathbf{L}}{dt} = \mathbf{r} \times m \frac{d\mathbf{v}}{dt} + \mathbf{v} \times m\mathbf{v}.
The cross product of any vector with itself is zero, so the second term vanishes. Hence with the definition of force F = ma (Newton's 2nd law),
\frac{d\mathbf{L}}{dt} = \mathbf{r} \times \mathbf{F}.
Then by definition, torque τ = r × F.
If multiple forces are applied, Newton's second law instead reads Fnet = ma, and it follows that
\frac{d\mathbf{L}}{dt} = \mathbf{r} \times \mathbf{F}_{\mathrm{net}} = \boldsymbol{\tau}_{\mathrm{net}}.
The proof relies on the assumption that mass is constant; this is valid only in nonrelativistic systems in which no mass is being ejected.
Units
Torque has dimensions of force times distance. Official SI literature suggests using the unit newton metre (N·m) or the unit joule per radian.[7] The unit newton metre is properly denoted N·m or N m.[8] This avoids ambiguity with mN, millinewtons.
The joule, which is the SI unit for energy or work, is dimensionally equivalent to a newton metre, but it is not used for torque. Energy and torque are entirely different concepts, so the practice of using different unit names for them helps avoid mistakes and misunderstandings.[7] The dimensional equivalence of these units, of course, is not simply a coincidence: A torque of 1 N·m applied through a full revolution will require an energy of exactly 2π joules. Mathematically,
E= \tau \theta\
where E is the energy, τ is magnitude of the torque, and θ is the angle moved (in radians). This equation motivates the alternate unit name joules per radian.[7]
In British unit, "poundforcefeet" (lbf x ft), "footpoundsforce", "inchpoundsforce", "ounceforceinches" (oz x in) are used, and other nonSI units of torque includes "metrekilogramsforce". For all these units, the word "force" is often left out,[9] for example abbreviating "poundforcefoot" to simply "poundfoot" (in this case, it would be implicit that the "pound" is poundforce and not poundmass).
Sometimes one may see torque given units that don't dimensionally make sense. For example: g x cm . In these units, g should be understood as the force given by the weight of 1 gram at the surface of the earth. The surface of the earth is understood to have an average acceleration of gravity (approx. 9.80665 m/sec2).
Special cases and other facts
Moment arm formula
Moment arm diagram
A very useful special case, often given as the definition of torque in fields other than physics, is as follows:
\tau = (\textrm{moment\ arm}) (\textrm{force}).
The construction of the "moment arm" is shown in the figure to the right, along with the vectors r and F mentioned above. The problem with this definition is that it does not give the direction of the torque but only the magnitude, and hence it is difficult to use in threedimensional cases. If the force is perpendicular to the displacement vector r, the moment arm will be equal to the distance to the centre, and torque will be a maximum for the given force. The equation for the magnitude of a torque, arising from a perpendicular force:
\tau = (\textrm{distance\ to\ centre}) (\textrm{force}).
For example, if a person places a force of 10 N on a spanner (wrench) which is 0.5 m long, the torque will be 5 N m, assuming that the person pulls the spanner by applying force perpendicular to the spanner.
The torque caused by the two opposing forces Fg and −Fg causes a change in the angular momentum L in the direction of that torque. This causes the top to precess.
Static equilibrium
For an object to be in static equilibrium, not only must the sum of the forces be zero, but also the sum of the torques (moments) about any point. For a twodimensional situation with horizontal and vertical forces, the sum of the forces requirement is two equations: ΣH = 0 and ΣV = 0, and the torque a third equation: Στ = 0. That is, to solve statically determinate equilibrium problems in twodimensions, we use three equations.
Net force versus torque
When the net force on the system is zero, the torque measured from any point in space is the same. For example, the torque on a currentcarrying loop in a uniform magnetic field is the same regardless of your point of reference. If the net force \mathbf{F} is not zero, and \mathbf{\tau}_1 is the torque measured from \mathbf{r}_1, then the torque measured from \mathbf{r}_2 is \mathbf{\tau}_2 = \mathbf{\tau}_1 + (\mathbf{r}_1  \mathbf{r}_2) \times \mathbf{F}
Machine torque
Torque curve of a motorcycle ("BMW K 1200 R 2005"). The horizontal axis is the speed (in rpm) that the crankshaft is turning, and the vertical axis is the torque (in Newton metres) that the engine is capable of providing at that speed.
Torque is part of the basic specification of an engine: the power output of an engine is expressed as its torque multiplied by its rotational speed of the axis. Internalcombustion engines produce useful torque only over a limited range of rotational speeds (typically from around 1,000–6,000 rpm for a small car). The varying torque output over that range can be measured with a dynamometer, and shown as a torque curve. The peak of that torque curve occurs somewhat below the overall power peak. The torque peak cannot, by definition, appear at higher rpm than the power peak.
Understanding the relationship between torque, power and engine speed is vital in automotive engineering, concerned as it is with transmitting power from the engine through the drive train to the wheels. Power is a function of torque and engine speed. The gearing of the drive train must be chosen appropriately to make the most of the motor's torque characteristics. Power at the drive wheels is equal to engine power less mechanical losses regardless of any gearing between the engine and drive wheels.
Steam engines and electric motors tend to produce maximum torque close to zero rpm, with the torque diminishing as rotational speed rises (due to increasing friction and other constraints). Reciprocating steam engines can start heavy loads from zero RPM without a clutch.
Relationship between torque, power and energy
If a force is allowed to act through a distance, it is doing mechanical work. Similarly, if torque is allowed to act through a rotational distance, it is doing work. Mathematically, for rotation about a fixed axis through the center of mass,
W = \int_{\theta_1}^{\theta_2} \tau\ \mathrm{d}\theta,
where W is work, τ is torque, and θ1 and θ2 represent (respectively) the initial and final angular positions of the body.[10] It follows from the workenergy theorem that W also represents the change in the rotational kinetic energy Krot of the body, given by
K_{\mathrm{rot}} = \tfrac{1}{2}I\omega^2,
where I is the moment of inertia of the body and ω is its angular speed.[10]
Power is the work per unit time, given by
P = \boldsymbol{\tau} \cdot \boldsymbol{\omega},
where P is power, τ is torque, ω is the angular velocity, and · represents the scalar product.
Mathematically, the equation may be rearranged to compute torque for a given power output. Note that the power injected by the torque depends only on the instantaneous angular speed – not on whether the angular speed increases, decreases, or remains constant while the torque is being applied (this is equivalent to the linear case where the power injected by a force depends only on the instantaneous speed – not on the resulting acceleration, if any).
In practice, this relationship can be observed in power stations which are connected to a large electrical power grid. In such an arrangement, the generator's angular speed is fixed by the grid's frequency, and the power output of the plant is determined by the torque applied to the generator's axis of rotation.
Consistent units must be used. For metric SI units power is watts, torque is newton metres and angular speed is radians per second (not rpm and not revolutions per second).
Also, the unit newton metre is dimensionally equivalent to the joule, which is the unit of energy. However, in the case of torque, the unit is assigned to a vector, whereas for energy, it is assigned to a scalar.
Conversion to other units
A conversion factor may be necessary when using different units of power, torque, or angular speed. For example, if rotational speed (revolutions per time) is used in place of angular speed (radians per time), we multiply by a factor of 2π radians per revolution.
\mbox{power} = \mbox{torque} \times 2 \pi \times \mbox{rotational speed}
Adding units:
\mbox{power (W)} = \mbox{torque (N}\cdot\mbox{m)} \times 2 \pi \times \mbox{rotational speed (rps)}
Dividing on the left by 60 seconds per minute and by 1000 watts per kilowatt gives us the following.
\mbox{power (kW)} = \frac{ \mbox{torque (N}\cdot\mbox{m)} \times 2 \pi \times \mbox{rotational speed (rpm)}} {60000}
where rotational speed is in revolutions per minute (rpm).
Some people (e.g. American automotive engineers) use horsepower (imperial mechanical) for power, footpounds (lbf·ft) for torque and rpm for rotational speed. This results in the formula changing to:
\mbox{power (hp)} = \frac{ \mbox{torque(lbf}\cdot\mbox{ft)} \times 2 \pi \times \mbox{rotational speed (rpm)} }{33000}.
The constant below in, ft·lbf/min, changes with the definition of the horsepower; for example, using metric horsepower, it becomes ~32,550.
Use of other units (e.g. BTU/h for power) would require a different custom conversion factor.
Derivation
For a rotating object, the linear distance covered at the circumference in a radian of rotation is the product of the radius with the angular speed. That is: linear speed = radius × angular speed. By definition, linear distance=linear speed × time=radius × angular speed × time.
By the definition of torque: torque=force × radius. We can rearrange this to determine force=torque ÷ radius. These two values can be substituted into the definition of power:
\mbox{power} = \frac{\mbox{force} \times \mbox{linear distance}}{\mbox{time}}=\frac{\left(\frac{\mbox{torque}}{\displaystyle{r}}\right) \times (r \times \mbox{angular speed} \times t)} {t} = \mbox{torque} \times \mbox{angular speed}.
The radius r and time t have dropped out of the equation. However angular speed must be in radians, by the assumed direct relationship between linear speed and angular speed at the beginning of the derivation. If the rotational speed is measured in revolutions per unit of time, the linear speed and distance are increased proportionately by 2π in the above derivation to give;[/spoiler]
andy lau laitu sebab ada Lau di hujung tu lagu .. long lau
~~You can complain because roses have thorns, or you can rejoice because thorns have roses~~

elle  Veteran SF
 Posts: 15299
 Joined: Sat Oct 30, 2010 2:15 pm
 Credit in hand: 131.41
 Bank: 31,081.54
 Location: Di sana sini
Re: Siapa penyanyi dan title lagu ini "lom pan long lai"?
Bukan Liew kaitu
Semenjak bnamino cerita pasal seks;liwat,video seks,terkini suara seks(matSabu)smpi negara luar gelar Msia Negara Seks;otak sia kotor oleh ketahian bnamino
http://ranau.bigforum.net/
http://ranau.bigforum.net/

orangaslisabah  SF Leaders
 Posts: 35240
 Joined: Sat Apr 05, 2008 2:30 am
 Credit in hand: 148.12
 Bank: 137,001.46
 Location: KOTA KINABALURANAU
Re: Siapa penyanyi dan title lagu ini "lom pan long lai"?
org cina atau si joshua

Bukit_Padang_Roller  Respected SF Veteran
 Posts: 31119
 Joined: Sat Dec 20, 2008 8:35 pm
 Credit in hand: 117.08
 Bank: 35,967.31
 Location: Dalam santut Mongolutan banyak hutan.
Re: Siapa penyanyi dan title lagu ini "lom pan long lai"?
Bukit_Padang_Roller wrote:org cina atau si joshua
ini kalilah
Semenjak bnamino cerita pasal seks;liwat,video seks,terkini suara seks(matSabu)smpi negara luar gelar Msia Negara Seks;otak sia kotor oleh ketahian bnamino
http://ranau.bigforum.net/
http://ranau.bigforum.net/

orangaslisabah  SF Leaders
 Posts: 35240
 Joined: Sat Apr 05, 2008 2:30 am
 Credit in hand: 148.12
 Bank: 137,001.46
 Location: KOTA KINABALURANAU
Re: Siapa penyanyi dan title lagu ini "lom pan long lai"?
orangaslisabah wrote:Bukan Liew kaitu
uik..bukan tu
~~You can complain because roses have thorns, or you can rejoice because thorns have roses~~

elle  Veteran SF
 Posts: 15299
 Joined: Sat Oct 30, 2010 2:15 pm
 Credit in hand: 131.41
 Bank: 31,081.54
 Location: Di sana sini
28 posts
• Page 1 of 2 • 1, 2

 Similar topics
 Replies
 Views
 Author

 An Indon Song with the title of "Untitled"?
in Music & Celebrities  0
 479
 by mazuin_tamparuli
Thu May 27, 2010 3:21 am
 An Indon Song with the title of "Untitled"?

 "AF Masuk", Siapa? Claudia atau Aishah?
in Radio, TV & Movies  20
 1976
 by Salou
Sat May 02, 2009 10:58 pm
 "AF Masuk", Siapa? Claudia atau Aishah?

 "ODOI ODU" big winner in Astro Kirana Short Film Award
in Radio, TV & Movies  16
 1271
 by Bulugu
Sat Mar 07, 2009 4:33 pm
 "ODOI ODU" big winner in Astro Kirana Short Film Award

 Suffian:"lelaki gentle yang gemarkan aktiviti extreme"
in Current Issues  9
 577
 by Bukit_Padang_Roller
Thu Apr 12, 2012 4:25 pm
 Suffian:"lelaki gentle yang gemarkan aktiviti extreme"

 Single terbaru dari Guntap : "Saya Cintakan Awak"
in Current Issues  27
 1415
 by Bukit_Padang_Roller
Thu Mar 08, 2012 4:54 pm
 Single terbaru dari Guntap : "Saya Cintakan Awak"
Who is online
Users browsing this forum: No registered users and 2 guests